DMV Practice LabAll tests

Georgia Motorcycle Practice 1

Selected knowledge practice, not a complete licensing course or practical training.

Georgia Motorcycle Practice 1

Practice mode
Question 1 of 18
  1. 1. You plan to drink alcohol at a gathering. What is the safest transportation plan to make before you leave home?
  2. 2. A helmet feels loose, shifts on your head, and leaves gaps at the brow pads. Its strap is already adjusted correctly. What should you do before riding?
  3. 3. Your protective boots fit properly, but their long lace loops hang beside the motorcycle's controls. What should you do before riding?
  4. 4. While seated on a motorcycle you are considering, your feet cannot reach the ground and you cannot support it confidently at rest. What is the best choice for beginning practice?
  5. 5. An unfamiliar motorcycle's engine is idling, and you are preparing to move away. You are unsure how its side-stand safety interlock works. What should you do?
  6. 6. On a motorcycle with a manual clutch, you are practicing a smooth start under supervision. The clutch has begun transmitting power, but the motorcycle is not yet moving steadily. What should you do?
  7. 7. You can see a clear curve ahead and recognize that your current approach speed is too high for it. Where should you make the planned speed reduction?
  8. 8. You are stopped at an intersection waiting for traffic ahead to move. Which observation should remain part of your scan?
  9. 9. A rider always uses the left portion of the lane, even when traffic and surface hazards change. What is the better approach?
  10. 10. A driver waiting to enter the road appears to see your approaching motorcycle. Why should you still be prepared for the driver to pull out?
  11. 11. In supervised two-wheel motorcycle training, a rider practices an avoidance maneuver that needs both braking and a swerve. How should these actions be coordinated?
  12. 12. A long truck ahead is maneuvering through a tight turn. A rider sees a narrow opening beside it. What should guide the rider's decision?
  13. 13. In a repaving area, one lane is higher than the adjacent lane. Why should a rider avoid crossing that raised edge quickly at a very shallow angle?
  14. 14. A deer stands beside the lane ahead. The rider has ample room to stop safely before reaching it, and no vehicle is following closely. What is the sound plan?
  15. 15. An experienced Class M rider plans to carry a heavier, properly secured cargo load within a two-wheel motorcycle's capacity. How should tire pressure and suspension preparation be determined?
  16. 16. An experienced Class M rider on a properly equipped two-wheel motorcycle is carrying a passenger and preparing to enter traffic. How should the rider account for the added weight?
  17. 17. A group of experienced two-wheel riders is following a slower vehicle where passing may be lawful. The leader finds a safe opportunity. What should the following riders do?
  18. 18. On a very hot ride, a rider's hands have become slippery with perspiration. What should the rider do before continuing with an unreliable grip?
Review all 18 questions with answers
  1. You plan to drink alcohol at a gathering. What is the safest transportation plan to make before you leave home?

    Correct answer: Leave the motorcycle at home and arrange a sober way to travel

    Plan transportation that does not require you to ride after drinking. A slower route, another rider, or protective gear does not remove alcohol's effects on judgment and control.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 2.1 - Alcohol, Other Drugs and Riding / Don't Drink or Don't Ride, printed 19 (physical 21). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  2. A helmet feels loose, shifts on your head, and leaves gaps at the brow pads. Its strap is already adjusted correctly. What should you do before riding?

    Correct answer: Try another size or model that fits comfortably and snugly

    A helmet should be comfortably snug, with appropriate pad contact, rather than loose or painfully tight. A correctly fastened strap does not make an oversized helmet fit properly.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 3.1 - Selecting and Wearing Protective Gear / Helmet Fit, printed 21 (physical 23). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  3. Your protective boots fit properly, but their long lace loops hang beside the motorcycle's controls. What should you do before riding?

    Correct answer: Secure and tuck the laces so they cannot catch on the motorcycle

    Secure loose laces before riding so they cannot catch on motorcycle parts. Tying them to the motorcycle or changing your foot position does not correct the snagging hazard.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 3.1 - Protective Riding Gear / protective footwear, printed 22 (physical 24). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  4. While seated on a motorcycle you are considering, your feet cannot reach the ground and you cannot support it confidently at rest. What is the best choice for beginning practice?

    Correct answer: Use a motorcycle that fits you and allows you to support it at a stop

    A motorcycle should fit the rider; the manual says your feet should reach the ground while seated. Improper tire pressure or a higher view over traffic does not make up for being unable to support the motorcycle confidently at a stop.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 3.2 - Getting to Know Your Motorcycle / motorcycle fit, printed 22 (physical 24). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  5. An unfamiliar motorcycle's engine is idling, and you are preparing to move away. You are unsure how its side-stand safety interlock works. What should you do?

    Correct answer: Confirm that the side stand is fully raised before moving

    Check the stand's position rather than relying on engine operation or assuming a particular interlock. The manual directs riders to raise the stand and notes that safety mechanisms differ among motorcycles.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 4.1 - Mounting the Motorcycle; Starting the Engine / side stand, printed 23 (physical 25). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  6. On a motorcycle with a manual clutch, you are practicing a smooth start under supervision. The clutch has begun transmitting power, but the motorcycle is not yet moving steadily. What should you do?

    Correct answer: Coordinate the throttle and gradual clutch release until the bike is moving and stable

    The friction zone is where the clutch begins transmitting power to the rear wheel. Use it progressively and do not fully release the clutch until the motorcycle is moving and stable; this is a manual-clutch scenario.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 4.2 - Riding in a Straight Line / Friction Zone, printed 23 (physical 25). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  7. You can see a clear curve ahead and recognize that your current approach speed is too high for it. Where should you make the planned speed reduction?

    Correct answer: Before entering the curve, while preparing a controlled turn

    Plan a suitable entry speed and reduce speed before the turn. Do not intentionally carry excessive speed into a curve and depend on a late correction.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 4.5 - Turning / Slow and speed before entry, printed 24 (physical 26). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  8. You are stopped at an intersection waiting for traffic ahead to move. Which observation should remain part of your scan?

    Correct answer: Check the mirrors for vehicles approaching from behind

    Mirror checks remain important while stopped, not only while changing lanes. Continue scanning around you so an approaching vehicle behind does not go unnoticed.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 5.2 - Risk Management / Search - mirror checks at intersections, printed 25 (physical 27). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  9. A rider always uses the left portion of the lane, even when traffic and surface hazards change. What is the better approach?

    Correct answer: Reassess the lane position as visibility, surface conditions and available space change

    No single lane position is best everywhere. Choose a position that supports seeing and being seen, avoids hazards, and preserves space; even the center is conditional on weather and road conditions.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 5.4 - Space Management / Lane Positions, printed 26 (physical 28). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  10. A driver waiting to enter the road appears to see your approaching motorcycle. Why should you still be prepared for the driver to pull out?

    Correct answer: The driver may misjudge the motorcycle's distance or speed even after seeing it

    A motorcycle can appear farther away or slower than it is. Being noticed does not guarantee correct judgment by the other driver, so continue to manage space and prepare for a possible conflict.

    Source: Georgia DDS Motorcycle Operators Manual 2023-2024, 5.6 - Increasing Conspicuity / distance and speed misjudgment, printed 28 (physical 30). Current DDS Manuals index linked this retained edition on 2026-09-13. ↗

  11. In supervised two-wheel motorcycle training, a rider practices an avoidance maneuver that needs both braking and a swerve. How should these actions be coordinated?

    Correct answer: Separate the braking action from the swerving action.

    The manual separates braking from swerving: brake before or after the swerve, not during it. Practice requires adequate space and qualified instruction; this is not a universal instruction to choose a swerve over a safe stop.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 31, physical PDF page 33; Section 6, 6.1 - Crash Avoidance, Swerving; Brake, then Swerve and Swerve, then Brake diagrams. ↗

  12. A long truck ahead is maneuvering through a tight turn. A rider sees a narrow opening beside it. What should guide the rider's decision?

    Correct answer: Leave extra room for the truck's turning maneuver.

    Large trucks need more maneuvering and turning room. A temporary opening beside a turning truck is not an invitation to squeeze into that space.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 32, physical PDF page 34; Section 6, 6.3 - Sharing the Road with Commercial Motor Vehicles, length/weight/turning-room bullets and TACT space guidance. ↗

  13. In a repaving area, one lane is higher than the adjacent lane. Why should a rider avoid crossing that raised edge quickly at a very shallow angle?

    Correct answer: The height difference can upset the motorcycle's control.

    The manual specifically warns that crossing into a higher repaved lane at high speed and a narrow angle can cause loss of control. Plan for the edge instead of treating the lanes as level.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 33, physical PDF page 35; Section 7, 7.2 - Work Zones, Rippled and uneven temporary pavement bullet, repaved-lane height difference. ↗

  14. A deer stands beside the lane ahead. The rider has ample room to stop safely before reaching it, and no vehicle is following closely. What is the sound plan?

    Correct answer: Stop before reaching the deer and wait for it to leave.

    Large animals are unpredictable. With a safe stopping opportunity, the manual's guidance is to stop before reaching the animal and wait for it to leave rather than predict a safe high-speed path beside it.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 33, physical PDF page 35; Section 7, 7.4 - Animals, larger animals paragraph; stopping-before-reaching and waiting option. ↗

  15. An experienced Class M rider plans to carry a heavier, properly secured cargo load within a two-wheel motorcycle's capacity. How should tire pressure and suspension preparation be determined?

    Correct answer: Follow that motorcycle's owner-manual guidance for the added load.

    Cargo weight changes handling and loading. The manual calls for checking tire pressures and appropriate suspension settings with reference to the motorcycle's owner's manual; it does not supply a universal setting.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 34, physical PDF page 36; Section 8, 8.1 - Carrying Passengers and Cargo, added weight, tire pressure, suspension and owner's-manual guidance. ↗

  16. An experienced Class M rider on a properly equipped two-wheel motorcycle is carrying a passenger and preparing to enter traffic. How should the rider account for the added weight?

    Correct answer: Wait for a larger suitable gap before entering traffic.

    The passenger section calls for larger gaps when crossing, entering, or merging with traffic. Added weight affects the motorcycle's response, so solo-riding assumptions should not be carried over unchanged.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 34, physical PDF page 36; Section 8, 8.1 - Carrying Passengers and Cargo, When riding with passengers, larger gaps and added space bullets. ↗

  17. A group of experienced two-wheel riders is following a slower vehicle where passing may be lawful. The leader finds a safe opportunity. What should the following riders do?

    Correct answer: Pass one at a time when each has a safe opportunity.

    Group members pass individually, not as a unit guaranteed the leader's gap. Each rider still needs a safe, lawful opportunity and room to return.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 34, physical PDF page 36; Section 8, 8.2 - Group Riding, Passing in a Group, one-at-a-time and safe-pass instructions; Group Passing Stages 1 and 2 diagrams. ↗

  18. On a very hot ride, a rider's hands have become slippery with perspiration. What should the rider do before continuing with an unreliable grip?

    Correct answer: Stop in a safe place and dry the hands.

    The hot-weather section advises stopping and drying hands that become slippery from perspiration. Attend to the problem while safely stopped, not by adjusting gear while moving.

    Source: 2023-2024 Georgia Motorcycle Operators Manual, printed page 35, physical PDF page 37; Section 9, 9.2 - Extreme Hot Weather, stopping and drying perspiring hands. ↗

Report a problem with this question

Question reference: ga-moto-safety-001

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information