DMV Practice LabChange state
NCNorth Carolina
DMV Practice LabAll tests

North Carolina CDL Cargo Safety: random practice

Selected knowledge practice, not a complete licensing course or practical training.

Start a practice test or explore the sample questions below.

Explore sample questions with answers

These public examples are not a selection of your saved mistakes.

Sample practice questions

Practice mode
Question 1 of 12
  1. 1. Warehouse staff load and secure accessible ordinary freight in a truck. The cargo can be inspected, and no sealed-load or impracticable-inspection exception applies. What should the driver do before departure?
  2. 2. At a safe parking location, a driver examines accessible freight and finds a tiedown that has become slack since departure. What is the appropriate next step?
  3. 3. Freight in a straight truck is held firmly, but its position prevents ready access to the truck's required emergency equipment. The driver's view and movements remain clear. Is the arrangement satisfactory?
  4. 4. A loaded freight truck is within its applicable total-weight limit, but the scale results show that one axle is overloaded. What should govern the departure decision?
  5. 5. A load planner can safely stack compatible dense crates and lighter packages in more than one arrangement. Which placement reduces the top-heavy condition?
  6. 6. A flatbed's heavy rigid freight is clustered along one side of the deck. Its total weight is acceptable. What loading issue still needs attention?
  7. 7. During loading, freight is moved so far rearward that the steering axle becomes too lightly loaded. The truck's total weight has not changed. Which concern should stop acceptance of that arrangement?
  8. 8. A freight truck has too little weight on its driving axles and must use a slippery loading-area approach. What effect can that poor distribution have?
  9. 9. Rigid freight has snug blocks beside it, but the blocks themselves are not secured to the deck and can slide with the freight. What is missing from that setup?
  10. 10. A closed freight van has cargo with enough free space to shift substantially inside. A loader argues that no securement is needed because nothing can fall onto the road. What is the overlooked concern?
  11. 11. For a suitable open-bed load that could spill material, a driver says a cover has no safety purpose because the forecast is dry. Which reason for covering is being missed?
  12. 12. A sealed freight unit is subject to an instruction not to open it for internal cargo inspection. Which statement is correct before departure, even when the seal is intact?
Review all 12 questions with answers

  1. Warehouse staff load and secure accessible ordinary freight in a truck. The cargo can be inspected, and no sealed-load or impracticable-inspection exception applies. What should the driver do before departure?

    Correct answer: Verify the load's balance, securement and possible overloading

    Having someone else load the freight does not remove the driver's cargo-safety responsibilities. The scenario expressly makes the cargo accessible and excludes the inspection exceptions; the driver must verify the relevant conditions before driving.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; Section 3 introduction; 3.1 - Inspecting Cargo; corroborating 49CFR392.9(a),(b)(1),(b)(4); printed3-1, physical69. Current NCDMV-linked copy reviewed September13,2026. ↗

  2. At a safe parking location, a driver examines accessible freight and finds a tiedown that has become slack since departure. What is the appropriate next step?

    Correct answer: Restore adequate securement before continuing the trip

    Cargo checks require necessary corrective adjustments, not just noting the condition. A previous satisfactory inspection or a still-attached hook does not make newly loose securement adequate.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.1 - Inspecting Cargo > After Starting and Re-check; corroborating 49CFR392.9(b)(2)-(4); printed3-1, physical69. Current NCDMV-linked copy reviewed September13,2026. ↗

  3. Freight in a straight truck is held firmly, but its position prevents ready access to the truck's required emergency equipment. The driver's view and movements remain clear. Is the arrangement satisfactory?

    Correct answer: No; the cargo must also leave emergency equipment readily accessible

    Securement is not the only cargo condition. The manual also requires that cargo not restrict access to emergency equipment. A load can be firmly held yet still obstruct something the driver needs in an emergency.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; Section 3 introduction > access to emergency equipment; corroborating 49CFR392.9(a)(3); printed3-1, physical69. Current NCDMV-linked copy reviewed September13,2026. ↗

  4. A loaded freight truck is within its applicable total-weight limit, but the scale results show that one axle is overloaded. What should govern the departure decision?

    Correct answer: Correct the loading; the overloaded axle remains a problem

    Total vehicle weight and axle loading are separate concerns. Unused capacity on another axle or stronger securement does not by itself correct an overloaded axle. No numerical legal limit or redistribution procedure is being supplied.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.2.1 - Axle Weight; 3.2.2 - Legal Weight Limits, continued physical70/printed3-2; 3.2.4 on physical70; printed3-1, physical69. Current NCDMV-linked copy reviewed September13,2026. ↗

  5. A load planner can safely stack compatible dense crates and lighter packages in more than one arrangement. Which placement reduces the top-heavy condition?

    Correct answer: Put the dense crates lower, beneath the lighter packages

    The manual recommends placing heavier cargo below lighter cargo and keeping the load as low as practicable. Strong tiedowns and unchanged total weight do not eliminate a high center of gravity.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.2.3 - Don't Be Top-heavy; Figure3.1; printed3-2, physical70. Current NCDMV-linked copy reviewed September13,2026. ↗

  6. A flatbed's heavy rigid freight is clustered along one side of the deck. Its total weight is acceptable. What loading issue still needs attention?

    Correct answer: The side-to-side distribution of the load's weight

    Figure3.1 contrasts an off-center load with balanced placement. Acceptable total weight does not establish good side-to-side distribution or remove the handling problem from loading one side heavily.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.2.4 - Balance the Weight; Figure3.1; printed3-2, physical70. Current NCDMV-linked copy reviewed September13,2026. ↗

  7. During loading, freight is moved so far rearward that the steering axle becomes too lightly loaded. The truck's total weight has not changed. Which concern should stop acceptance of that arrangement?

    Correct answer: Too little steering-axle load can make steering unsafe

    Moving weight too far rearward can underload the steering axle. The manual identifies an axle that is too light as a steering problem; total weight alone does not describe the load distribution.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.2.4 - Balance the Weight > under-loaded front axle; printed3-2, physical70. Current NCDMV-linked copy reviewed September13,2026. ↗

  8. A freight truck has too little weight on its driving axles and must use a slippery loading-area approach. What effect can that poor distribution have?

    Correct answer: It can allow the driving wheels to spin more easily

    Too little load on the driving axles can produce poor traction and wheel spin. This concerns weight distribution on the existing drive axles, not gaining traction simply by adding more trailer axles.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.2.4 - Balance the Weight > driving-axle traction; printed3-2, physical70. Current NCDMV-linked copy reviewed September13,2026. ↗

  9. Rigid freight has snug blocks beside it, but the blocks themselves are not secured to the deck and can slide with the freight. What is missing from that setup?

    Correct answer: The blocking must be secured so it can resist cargo movement

    The manual describes blocking fitted snugly against cargo and secured to the cargo deck. Loose filler that travels with the freight does not provide the intended restraint. No improvised fastening or construction recipe is given.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.3.1 - Blocking and Bracing; printed3-2, physical70. Current NCDMV-linked copy reviewed September13,2026. ↗

  10. A closed freight van has cargo with enough free space to shift substantially inside. A loader argues that no securement is needed because nothing can fall onto the road. What is the overlooked concern?

    Correct answer: Cargo movement inside the van can still affect vehicle handling

    The manual notes that tiedowns can matter inside closed vans because shifting cargo can affect vehicle handling. Keeping freight inside the body does not, by itself, keep it in its intended position.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.3.2 - Cargo Tie-down; printed3-2, physical70. Current NCDMV-linked copy reviewed September13,2026. ↗

  11. For a suitable open-bed load that could spill material, a driver says a cover has no safety purpose because the forecast is dry. Which reason for covering is being missed?

    Correct answer: A cover can help protect other road users from spilled cargo

    The manual gives spill protection as well as weather protection as reasons to cover cargo. This identifies a safety purpose, not a universal state-law covering rule or a substitute for securement.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.3.4 - Covering Cargo; printed3-3, physical71. Current NCDMV-linked copy reviewed September13,2026. ↗

  12. A sealed freight unit is subject to an instruction not to open it for internal cargo inspection. Which statement is correct before departure, even when the seal is intact?

    Correct answer: The vehicle's gross and axle weights still need to be acceptable

    The handbook expressly retains gross- and axle-weight checks for sealed loads. The federal inspection exception is qualified: a sealed vehicle with a no-open order, or cargo whose inspection is impracticable, is not a blanket removal of safe-loading or other applicable duties.

    Source: North Carolina Commercial Driver License Manual, 2005 CDL Testing System, Version July2014; 3.3.5 - Sealed and Containerized Loads; qualified by 49CFR392.9(b)(4), with (a) also read; printed3-3, physical71. Current NCDMV-linked copy reviewed September13,2026. ↗

Report a problem with this question

Question reference: nc-cdl-cargo-001

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information

Home / North Carolina / CDL

North Carolina CDL Cargo Safety: random practice

10 questions from the 20-question subject question set. Restart for another selection. Practice without a timer and review each explanation.

All topics and study tools
Back to all Cargo Safety practice tests

The 10-question length is our study choice, not an official test count. Read the applicable chapters of the official CDL manual and complete required practical training.