DMV Practice LabAll tests

Vermont Common Rider Practice 1

Practice common two-wheel riding skills. Check Vermont rules for permit restrictions, passengers and riding at night. How we built this practice.

Vermont Common Rider Practice 1

Practice mode
Question 1 of 20
  1. 1. You find a helmet with loose padding and a frayed strap. What is the sound choice before riding?
  2. 2. Your face shield is deeply scratched and fogs enough to hide traffic. What should you address before setting off?
  3. 3. Which footwear is most suitable for a motorcycle trip?
  4. 4. A friend lends you a motorcycle with controls that feel different from yours. What should happen before you join traffic?
  5. 5. While checking the motorcycle before a trip, you notice low tire pressure and a fresh fluid puddle beneath it. What is appropriate?
  6. 6. The brake light comes on with the rear pedal. What else should you check before the ride?
  7. 7. During a stationary pre-ride check, the throttle does not return when released. What should you do?
  8. 8. Another person has just used your motorcycle and changed both mirror positions. When should you readjust them?
  9. 9. Your elbows are locked straight because you are sitting too far from the handlebars. Which adjustment improves access to the controls?
  10. 10. What starting position of your right wrist helps avoid accidentally opening the throttle too far?
  11. 11. During ordinary riding, where should your feet remain?
  12. 12. You are still moving too quickly for first gear on a manual motorcycle. What is the risk of selecting it and releasing the clutch abruptly?
  13. 13. On a conventional motorcycle with separate brake controls, which habit should you build for routine slowing and stopping?
  14. 14. Why must braking while leaned into a curve be especially controlled?
  15. 15. A curve ahead is sharper than the road you have just been riding. When should you make the main reduction to an appropriate entry speed?
  16. 16. In a normal turn, where should you direct your eyes?
  17. 17. At ordinary road speed on a two-wheel motorcycle, you need to initiate a left turn. Which handgrip input does the Iowa-linked motorcycle manual describe?
  18. 18. During a slow, tight maneuver on a two-wheel motorcycle, how does the Iowa-linked motorcycle manual describe counterbalancing?
  19. 19. You have stopped at a traffic signal on a manual motorcycle. Which gear leaves you better prepared to move if a safe escape becomes necessary?
  20. 20. A rider insists on staying in the left third of the lane for the entire trip. What is the better strategy?
Review all 20 questions with answers
  1. You find a helmet with loose padding and a frayed strap. What is the sound choice before riding?

    Correct answer: Choose a sound, properly fitting DOT-compliant helmet that fastens securely.

    A helmet should fit snugly and have no obvious defects. A damaged or unfastened retention system can prevent it from staying on during a crash.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 3, physical PDF page 8; Helmet Selection. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  2. Your face shield is deeply scratched and fogs enough to hide traffic. What should you address before setting off?

    Correct answer: Restore clear, securely attached eye or face protection with suitable ventilation.

    Effective protection must preserve a clear view, resist penetration, stay attached and allow airflow to reduce fogging. Do not trade visibility for the appearance of having protective gear.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 4, physical PDF page 9; Eye and Face Protection. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  3. Which footwear is most suitable for a motorcycle trip?

    Correct answer: Sturdy ankle-covering boots with slip-resistant soles and secured laces.

    Protect the ankles and keep footwear clear of controls and moving parts. Secure laces and suitable soles help prevent avoidable slips or snags.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 4, physical PDF page 9; Clothing. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  4. A friend lends you a motorcycle with controls that feel different from yours. What should happen before you join traffic?

    Correct answer: Read its instructions and practice with the controls in a controlled area.

    Experience does not make every motorcycle familiar. Locate the controls and learn their response away from traffic, then ride cautiously while getting used to the machine.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed pages 6, 7, physical PDF pages 11, 12; Get Familiar with the Motorcycle Controls. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  5. While checking the motorcycle before a trip, you notice low tire pressure and a fresh fluid puddle beneath it. What is appropriate?

    Correct answer: Investigate and correct the problems before riding.

    Check tire pressure, wear and tread, fluid levels and signs of leaks before riding. Small faults can have serious consequences for a motorcycle’s balance and control.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 7, physical PDF page 12; Check Your Motorcycle / Tires and Wheels / Oil and Other Fluids. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  6. The brake light comes on with the rear pedal. What else should you check before the ride?

    Correct answer: That operating the front brake control also activates the brake light.

    Test the brake light with each brake control. A working light on one control does not establish that the other switch works.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 7, physical PDF page 12; Lights and Electrics. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  7. During a stationary pre-ride check, the throttle does not return when released. What should you do?

    Correct answer: Have the fault corrected before riding.

    The throttle should move smoothly and return when released. A sticking control is a defect to resolve before entering traffic, not a riding technique to work around.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 7, physical PDF page 12; Controls. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  8. Another person has just used your motorcycle and changed both mirror positions. When should you readjust them?

    Correct answer: While stationary before starting the trip.

    Clean and adjust mirrors before riding so you can see behind and beside you. Adjusting them while moving diverts attention and may require riding one-handed.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 7, physical PDF page 12; Lights and Electrics. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  9. Your elbows are locked straight because you are sitting too far from the handlebars. Which adjustment improves access to the controls?

    Correct answer: Sit comfortably close enough to keep your arms slightly bent.

    A comfortable position with slightly bent arms permits steering inputs without reaching too far. Adjust your position so you can operate the controls effectively.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 9, physical PDF page 14; Body Position. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  10. What starting position of your right wrist helps avoid accidentally opening the throttle too far?

    Correct answer: Keep the wrist flat while holding the grip.

    A flat right wrist helps moderate throttle input. Maintain a firm, comfortable grip rather than setting up a position that can roll on excessive power unintentionally.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 9, physical PDF page 14; Body Position / Hands. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  11. During ordinary riding, where should your feet remain?

    Correct answer: On the footpegs near the controls, without toes pointing down.

    Footpegs support balance and keep the feet available for the controls. Dangling or dragging a foot can catch it on the road and upset control.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 9, physical PDF page 14; Body Position / Feet. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  12. You are still moving too quickly for first gear on a manual motorcycle. What is the risk of selecting it and releasing the clutch abruptly?

    Correct answer: The rear tire may skid when the lower gear suddenly slows it.

    Choose a gear suited to your road speed and release the clutch smoothly. A sudden mismatch between engine and wheel speed can upset rear-wheel traction.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 10, physical PDF page 15; Shifting Gears. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  13. On a conventional motorcycle with separate brake controls, which habit should you build for routine slowing and stopping?

    Correct answer: Apply both brakes smoothly together.

    Practice coordinated front and rear braking so the habit is available in an emergency. Squeeze rather than grab the front lever, and understand your own motorcycle’s linked or anti-lock system.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed pages 10, 11, physical PDF pages 15, 16; Braking. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  14. Why must braking while leaned into a curve be especially controlled?

    Correct answer: Some available tire grip is already being used to corner.

    Turning and braking share available traction. Abrupt braking while leaned can exceed that grip; learn the appropriate technique through rider training.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 11, physical PDF page 16; Braking in a Corner. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  15. A curve ahead is sharper than the road you have just been riding. When should you make the main reduction to an appropriate entry speed?

    Correct answer: Before entering the curve.

    Assess the curve and slow before leaning into it. Entering too fast reduces your margin and can cause a wide path or an abrupt, destabilizing correction.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 12, physical PDF page 17; Turning / Slow. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  16. In a normal turn, where should you direct your eyes?

    Correct answer: Through the turn toward the path you intend to follow.

    Turn the head to look along the intended path and keep the eyes level. Fixating on the front wheel or a hazard does not provide the forward view needed for a controlled turn.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 12, physical PDF page 17; Turning / Look. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  17. At ordinary road speed on a two-wheel motorcycle, you need to initiate a left turn. Which handgrip input does the Iowa-linked motorcycle manual describe?

    Correct answer: Press the left handgrip to initiate a left lean.

    For the two-wheel road-speed technique described, pressure on the left grip initiates the left lean. This is not steering instruction for a non-leaning trike; learn and practice with a qualified rider coach.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 12, physical PDF page 17; Turning / Press. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  18. During a slow, tight maneuver on a two-wheel motorcycle, how does the Iowa-linked motorcycle manual describe counterbalancing?

    Correct answer: Let the motorcycle lean while keeping your body more upright.

    Slow, tight turns use counterbalancing rather than simply copying the body position of a normal road-speed turn. Practice these skills off-street with appropriate instruction.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 12, physical PDF page 17; Slow, Tight Turns. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  19. You have stopped at a traffic signal on a manual motorcycle. Which gear leaves you better prepared to move if a safe escape becomes necessary?

    Correct answer: First gear, ready for a controlled start.

    Remaining in first gear avoids a gear-selection delay if you need to move. Continue watching traffic and use only a clear, safe escape path.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 10, physical PDF page 15; Shifting Gears. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

  20. A rider insists on staying in the left third of the lane for the entire trip. What is the better strategy?

    Correct answer: Change lane position as visibility, traffic and surface hazards change.

    No single position provides the best view and space in every situation. Choose a position within your lane that helps others see you, avoids hazards and preserves an escape path.

    Source: Iowa DOT-linked Motorcycle Operator Manual (catalog labels it Archived), Form 430008 PM802 05/14/2024; MSF 18th revision June 2020; printed page 13, physical PDF page 18; Lane Positions. General riding guidance, not a statement of Iowa licensing or equipment law. ↗

Report a problem with this question

Question reference: vt-moto-shared-001

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information