DMV Practice LabAll tests

Washington Three-Wheel Practice 2

Selected knowledge practice, not a complete licensing course or practical training.

Washington Three-Wheel Practice 2

Practice mode
Question 1 of 12
  1. 1. During a normal turn on a non-leaning three-wheeler, what should the rider do with their upper body to help stability?
  2. 2. A three-wheeled motorcycle has two wheels at the front and one at the rear. Which layout does the manual call this?
  3. 3. A gap around an obstacle looks wide enough for a narrow two-wheel motorcycle. What must a three-wheel rider consider before choosing that escape path?
  4. 4. Why can a sudden swerve create a particular rollover hazard on a three-wheeler?
  5. 5. A sidecar rig reaches a balanced two-wheel state after the sidecar wheel rises. Why is this not ordinary three-wheel handling?
  6. 6. An appropriately endorsed rider has one passenger and a sidecar rig equipped for that passenger. Where does the manual recommend seating them for stability?
  7. 7. A sidecar rig is designed and properly equipped to carry two passengers, within its load limit. Where should the heavier passenger sit?
  8. 8. You are preparing a trike for a passenger and luggage. How should you determine its load limit and any pressure or suspension changes?
  9. 9. Your three-wheeler has properly functioning front and rear braking controls. For a controlled straight-line stop, which technique should you practice?
  10. 10. You need to slow a three-wheeler while already in a curve. Why must brake application account for the turn?
  11. 11. After adding a passenger and cargo within the approved limits, can you assume your trike will accelerate, stop and corner just as it did solo?
  12. 12. You have years of two-wheel riding experience but are about to use a sidecar rig for the first time. What preparation makes sense?
Review all 12 questions with answers
  1. During a normal turn on a non-leaning three-wheeler, what should the rider do with their upper body to help stability?

    Correct answer: Shift it toward the inside of the turn.

    Moving the rider's body toward the turn helps resist inside-wheel lift. The rider's body shift is not a claim that the entire non-leaning rig tilts like a two-wheel motorcycle.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 46, printed 4-8; Cornering Steps, step3. ↗

  2. A three-wheeled motorcycle has two wheels at the front and one at the rear. Which layout does the manual call this?

    Correct answer: A reverse trike.

    The position of the wheel pair distinguishes a reverse trike from a conventional trike. Its handling should be learned for that actual vehicle rather than inferred from appearance alone.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 39, printed 4-1; Types of Three-Wheelers; Figure 4-1C. ↗

  3. A gap around an obstacle looks wide enough for a narrow two-wheel motorcycle. What must a three-wheel rider consider before choosing that escape path?

    Correct answer: Whether the whole wider rig can safely fit through it.

    A sidecar or trike needs clearance for its entire width. A path suitable for a narrow bike may not be a usable escape route for your rig.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 50, printed 4-12; Swerves; vehicle size and available space. ↗

  4. Why can a sudden swerve create a particular rollover hazard on a three-wheeler?

    Correct answer: Rapid side loads can upset the rig across a support boundary.

    A quick directional change can create destabilizing side loads, especially with a sidecar. Assess stopping room and an actual escape path; no one maneuver is safest in every emergency.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 50, printed 4-12; Swerves; side loads and rollover. ↗

  5. A sidecar rig reaches a balanced two-wheel state after the sidecar wheel rises. Why is this not ordinary three-wheel handling?

    Correct answer: Its steering can revert to two-wheel countersteering.

    The manual describes a balance-point change in steering behavior. Do not deliberately lift a wheel on public roads; recognizing this hazard is not a substitute for supervised three-wheel training.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 44, printed 4-6; Flying and Steering Reversion. ↗

  6. An appropriately endorsed rider has one passenger and a sidecar rig equipped for that passenger. Where does the manual recommend seating them for stability?

    Correct answer: In the sidecar's proper passenger seat.

    Seating the single passenger in the sidecar places weight where it helps resist lift. Use the actual approved passenger seating and comply with all passenger requirements.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 50, printed 4-12; Carrying Passengers and Cargo; single passenger. ↗

  7. A sidecar rig is designed and properly equipped to carry two passengers, within its load limit. Where should the heavier passenger sit?

    Correct answer: In the sidecar rather than on the motorcycle's rear seat.

    For this equipped rig, the manual recommends placing the larger passenger in the sidecar to help reduce lift in turns. It does not authorize exceeding seating or load limits.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 50, printed 4-12; Carrying Passengers and Cargo; two passengers. ↗

  8. You are preparing a trike for a passenger and luggage. How should you determine its load limit and any pressure or suspension changes?

    Correct answer: Use the instructions for that specific trike and load.

    Vehicle-specific instructions establish weight capacity and may require different tire or suspension settings when carrying a load. Do not invent a universal adjustment.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 50, printed 4-12; Carrying Passengers and Cargo; owner instructions. ↗

  9. Your three-wheeler has properly functioning front and rear braking controls. For a controlled straight-line stop, which technique should you practice?

    Correct answer: Use all its brakes together with progressive pressure.

    Coordinating the available brakes smoothly uses the rig's stopping ability while avoiding abrupt traction demands. Follow its specific braking-system instructions, including any ABS requirements.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 48, printed 4-10; Braking in a Straight Line; Figure 4-9 on physical49. ↗

  10. You need to slow a three-wheeler while already in a curve. Why must brake application account for the turn?

    Correct answer: Cornering already uses some of the available tire grip.

    Braking and cornering share limited traction. Use the brakes smoothly and progressively while preserving control; excessive demand can produce a skid out of your lane.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 49, printed 4-11; Braking in a Corner, continued from physical48. ↗

  11. After adding a passenger and cargo within the approved limits, can you assume your trike will accelerate, stop and corner just as it did solo?

    Correct answer: No; allow for changed acceleration, braking and cornering.

    A permissible load can still change how the rig responds. Adjust spacing, speed and maneuver planning to the loaded vehicle rather than treating the limit as a guarantee of unchanged handling.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 50, printed 4-12; Carrying Passengers and Cargo; effects of added weight. ↗

  12. You have years of two-wheel riding experience but are about to use a sidecar rig for the first time. What preparation makes sense?

    Correct answer: Learn its different handling through three-wheel training.

    Experience on two wheels helps road awareness but does not teach all sidecar or trike responses. Practice the actual vehicle's steering, braking and stability in appropriate training.

    Source: Washington Motorcycle Operator Manual, 520-407 (R/12/21); physical 39, printed 4-1; Differences between Two- and Three-Wheeled Motorcycles. ↗

Report a problem with this question

Question reference: wa-moto-threewheel-013

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information

Home / Washington / Motorcycle

Washington Three-Wheel Practice 2

12 three-wheel handling questions. The two sets do not overlap and are separate from two-wheel practice. This is written study, not a riding-skills test.