At night, an oncoming vehicle is now about one block away. Which action follows the Connecticut manual's headlight guidance?
Correct answer: Dim your high beams now so they do not glare into the other driver's eyes.
The manual says to dim high beams when you come within about a block of an oncoming vehicle. It also directs drivers to use low beams when following another vehicle.
Source: Connecticut Driver's Manual, revised March 2023; printed p. 38; PDF p. 40 — Night Driving: dimming high beams for approaching and leading traffic ↗
A slow bicyclist is ahead beside double-yellow centerlines on a straight road. No intersection, rail crossing or other passing hazard is nearby, and you can see enough clear road ahead to pass safely. What does Connecticut's rule allow?
Correct answer: Cross the double-yellow lines to pass safely while leaving at least three feet from the bicyclist.
The manual permits safely passing a bicycle in a no-passing zone, including crossing double-yellow lines, when sufficient clear sight distance makes the maneuver safe. The exception does not remove the need to avoid opposing traffic and leave at least three feet of passing clearance.
Source: Connecticut Driver's Manual, revised March 2023; printed p. 18; PDF p. 20 — Slow Moving Vehicles: safe no-passing-zone exception; Bicyclists, printed p. 17: three-foot clearance ↗
You reach the sign shown at a quiet intersection. What does it require even when no traffic is visible?
Correct answer: A complete stop before proceeding when safe.
STOP requires a full stop, not merely a reduction in speed. Use the stop line, or the appropriate crosswalk or intersection stopping position, then yield before proceeding.
Source: FHWA MUTCD 2009, Figure 2b_01; sign R1-1: Stop; official illustration and description checked September 15, 2026. ↗
What instruction does this triangular sign give as you approach crossing traffic?
Correct answer: Slow down and give way, stopping if necessary.
YIELD means give the right-of-way to traffic in the intersection or road you are entering. Slow enough to assess the situation and stop when needed.
Source: FHWA MUTCD 2009, Figure 2b_01; sign R1-2: Yield; official illustration and description checked September 15, 2026. ↗
This sign faces you at a roadway opening. Which action follows its instruction?
Correct answer: Do not use that opening to enter the roadway.
DO NOT ENTER prohibits entry from the direction you are approaching. An empty roadway does not cancel the restriction; find a lawful entrance.
Source: FHWA MUTCD 2009, Figure 2b_11; sign R5-1: Do Not Enter; official illustration and description checked September 15, 2026. ↗
You see this sign facing your vehicle after a turn. What danger does it identify?
Correct answer: You are traveling toward opposing traffic in the wrong direction.
WRONG WAY warns that you have entered against the permitted traffic direction. Correct the mistake as quickly and safely as possible; do not continue farther into oncoming traffic.
Source: FHWA MUTCD 2009, Figure 2b_11; sign R5-1a: Wrong Way; official illustration and description checked September 15, 2026. ↗
Which maneuver is ruled out by this symbol?
Correct answer: Turning left.
The red slash cancels the left-turn movement shown by the arrow. It does not itself prohibit going straight or establish priority over pedestrians.
Source: FHWA MUTCD 2009, Figure 2b_04; sign R3-2: No Left Turn; official illustration and description checked September 15, 2026. ↗
A driver wants to turn in the direction crossed out on this sign. What should the driver do?
Correct answer: Continue by a permitted movement instead of turning right.
This is a NO RIGHT TURN regulatory sign. The crossed-out arrow prohibits the maneuver; it is not a yellow warning sign about the road bending.
Source: FHWA MUTCD 2009, Figure 2b_04; sign R3-1: No Right Turn; official illustration and description checked September 15, 2026. ↗
What movement does this sign prohibit?
Correct answer: Turning around to travel in the opposite direction.
The U-shaped arrow identifies a U-turn. The sign prohibits that reversal of direction, rather than every possible movement involving a leftward steer.
Source: FHWA MUTCD 2009, Figure 2b_04; sign R3-4: No U-Turn; official illustration and description checked September 15, 2026. ↗
This sign stands at a roadway obstruction. On which side should traffic pass it?
Correct answer: On the right side of the obstruction.
KEEP RIGHT directs you around the indicated obstruction or road feature on its right. It is not an instruction to leave the roadway.
Source: FHWA MUTCD 2009, Figure 2b_10; sign R4-7: Keep Right; official illustration and description checked September 15, 2026. ↗
This sign applies to the lane you are using at the intersection. Which movement is permitted from that lane?
Correct answer: A left turn only.
The left arrow with ONLY restricts the lane to a left turn. Select a different lawful lane in advance if you need to continue straight.
Source: FHWA MUTCD 2009, Figure 2b_04; sign R3-5: Lane Control; official illustration and description checked September 15, 2026. ↗
What must a driver in the lane governed by this sign plan to do?
Correct answer: Continue straight through the intersection.
The straight arrow and ONLY identify a through-only lane. A turn signal does not create permission to turn from it.
Source: FHWA MUTCD 2009, Figure 2b_04; sign R3-5a: Lane Control; official illustration and description checked September 15, 2026. ↗
How does this yellow sign differ from the red sign it pictures?
Correct answer: It warns that a stop sign is ahead.
STOP AHEAD gives advance notice so you can prepare to stop at the upcoming controlled location. The yellow warning sign itself is not the intersection stop sign.
Source: FHWA MUTCD 2009, Figure 2c_06; sign W3-1: Stop Ahead; official illustration and description checked September 15, 2026. ↗
What should you expect beyond this warning sign?
Correct answer: A traffic signal that may require you to stop.
The pictured signal warns of traffic lights ahead. It does not display the current signal phase or grant permission to proceed.
Source: FHWA MUTCD 2009, Figure 2c_06; sign W3-3: Signal Ahead; official illustration and description checked September 15, 2026. ↗
What traffic change does the joining branch on this sign warn about?
Correct answer: Traffic entering from another road will merge into the roadway.
The joining branch represents merging traffic. Watch for vehicles entering and allow room for a safe merge; do not confuse it with the added-lane symbol.
Source: FHWA MUTCD 2009, Figure 2c_08; sign W4-1: Merge; official illustration and description checked September 15, 2026. ↗
What does this sign tell you about traffic arriving from the right?
Correct answer: It enters a separate added lane rather than immediately merging into yours.
An added lane continues beside the through lane. This is different from a merge, although drivers must still check traffic before making any later lane change.
Source: FHWA MUTCD 2009, Figure 2c_08; sign W4-3: Added Lane; official illustration and description checked September 15, 2026. ↗
You are traveling in the right lane when this sign appears. What should you prepare to do?
Correct answer: Merge left safely because the right lane ends.
The right side tapers away, showing the right lane ending. Check traffic and merge left when safe, yielding to vehicles already in that lane.
Source: FHWA MUTCD 2009, Figure 2c_08; sign W4-2: Lane Ends/Merge Left; official illustration and description checked September 15, 2026. ↗
Which change in the road layout is shown here?
Correct answer: Opposing directions will be separated by a median or barrier ahead.
The divider is at the far end of the symbol: a divided section begins ahead. Keep to the proper side of the median.
Source: FHWA MUTCD 2009, Figure 2c_05; sign W6-1: Begin Divided Roadway; official illustration and description checked September 15, 2026. ↗
What should you expect after passing this warning?
Correct answer: Two-way traffic without the median or barrier that separated it.
The divider ends in the direction of travel. Be ready for opposing traffic on an undivided roadway, not for the end of all oncoming traffic.
Source: FHWA MUTCD 2009, Figure 2c_05; sign W6-2: End Divided Roadway; official illustration and description checked September 15, 2026. ↗
Rain begins as you approach the road section marked by this sign. What concern should guide your driving?
Correct answer: The pavement can become unusually slippery when wet.
The tracks depict skidding, not the route of the road. Reduce speed as conditions require and use smooth steering, braking and acceleration.
Source: FHWA MUTCD 2009, Figure 2c_06; sign W8-5: Slippery When Wet; official illustration and description checked September 15, 2026. ↗
