What does this pennant identify?
Correct answer: The start of a no-passing zone.
The pennant marks the start of a no-passing zone. Connecticut has specific exceptions for safely passing slow-moving traffic and certain road users; the sign is not a general invitation to pass whenever traffic slows.
Source: Connecticut Driver's Manual, revised March 2023, Pennant: No Passing Zone; printed page 46, physical PDF page 48. Currently linked manual checked September 29, 2026. ↗
What type of destination does the brown background commonly identify?
Correct answer: A recreational or cultural-interest destination.
Brown signs guide traffic to recreational or cultural destinations. The winter-sports example gives directions, not a chain requirement.
Source: Connecticut Driver's Manual, revised March 2023, Parks and Recreation; printed page 51, physical PDF page 53. Currently linked manual checked September 29, 2026. ↗
Two lanes are separated by a yellow center line. What does the color tell you about their traffic?
Correct answer: The lanes carry traffic in opposite directions.
Yellow center lines separate opposing traffic. The pattern of the lines and the road situation determine whether passing is permitted.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Yellow center-line color; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
A white lane line separates two adjacent travel lanes. What does that color normally indicate?
Correct answer: The lanes carry traffic in the same direction.
White lane lines separate same-direction lanes. Their color has a different meaning from yellow center lines separating opposing flows.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: White lane-line color; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
A two-way road has the single broken yellow center line shown. What does the marking permit?
Correct answer: Passing from either direction when the maneuver is otherwise safe and lawful.
A broken yellow center line identifies a passing-permitted section in both directions. It does not remove the need for a clear view, a safe gap, and compliance with other restrictions.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Broken yellow center line; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
Under the normal passing rule, what does the solid yellow line nearest your lane indicate?
Correct answer: Passing across the center lines is not permitted from your side.
With a broken/solid pair, the line nearest your lane governs the normal passing restriction. Connecticut separately permits safely passing certain slow-moving traffic and road users; these exceptions do not grant priority over oncoming traffic.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Solid side of a mixed yellow line; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. For exceptions see printed pages 17-18. ↗
You are beside the broken yellow line, with a solid yellow line beyond it. How does the marking affect a proposed pass?
Correct answer: Passing may be allowed from your side if traffic, visibility, and other rules permit.
A broken line on your side permits a pass when safe and otherwise lawful. Drivers on the solid-line side do not have the same passing permission.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Broken side of a mixed yellow line; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
What normal passing restriction do two solid yellow center lines indicate?
Correct answer: Passing across the lines is prohibited in both directions.
The double solid yellow pattern marks a no-passing section for ordinary overtaking. Connecticut separately allows safe left turns and specified exceptions for slow-moving traffic and certain road users; never assume the marking gives priority.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Double solid yellow passing restriction; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. See also Slow Moving Vehicles, printed page18, for specific passing exceptions. ↗
You need to turn left into a driveway across solid yellow center lines, with no sign prohibiting the turn. What does Connecticut's handbook say?
Correct answer: The lines do not prohibit this driveway turn, but you must wait until it is safe.
Connecticut allows crossing solid yellow center lines to turn left to or from an alley, private road, driveway or street. Wait for a safe gap and obey any separate turn restriction.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Left turn across yellow center lines; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
What does the broken white line between the two same-direction lanes indicate?
Correct answer: A lane change is permitted when it can be made safely.
A broken white line allows lane changes but does not give the changing driver priority. Check traffic and signal before crossing it.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Broken white lane line; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
What does the single solid white line between these same-direction lanes communicate?
Correct answer: Stay in your lane unless a special situation requires a safe lane change.
Connecticut's manual says a single solid white lane line means stay in the lane unless a special situation requires changing lanes. Double solid white lines prohibit lane changes.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Solid white lane line; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
In the diagram, what does the solid white line along the far-right edge identify?
Correct answer: The edge of the roadway or shoulder boundary.
A solid white edge line marks the right edge of the roadway. The space beyond the edge line is not automatically an additional travel lane.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: White right edge line; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
On a divided roadway, what does the solid yellow line at the left edge identify?
Correct answer: The left boundary of that roadway.
The yellow edge line identifies the left boundary of a divided roadway. Its position distinguishes it from a center line between opposing traffic.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Yellow left edge line; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
What is the purpose of the center lane marked with opposing left-turn arrows and solid/broken yellow boundaries?
Correct answer: Left turns by traffic from either direction.
This shared lane serves left-turning vehicles from either direction, and U-turns where permitted. It is not an extra through lane or a passing lane; check that it is available and safe before entering.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Shared center left-turn markings; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
What type of lane is indicated by the double broken yellow boundaries shown around the middle lane?
Correct answer: A lane whose permitted direction can change according to posted controls.
Double broken yellow lines can identify a reversible lane. Signs or lane-use signals govern its operation; the marking does not mean that an empty lane is automatically available.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Reversible lane boundaries; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
A lane has a white diamond marking and signs naming permitted users. What should the marking tell you?
Correct answer: It is a preferential lane; read the signs to determine whether your vehicle qualifies.
The diamond identifies a reserved lane. Read the signs for the permitted users, required occupancy and any operating times; congestion does not cancel those restrictions.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Diamond preferential-lane marking; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
Your lane has a pavement arrow showing only a right turn. What movement does the marking reserve that lane for?
Correct answer: Turning right.
Directional pavement arrows specify the permitted lane movement. Choose the proper lane before the intersection instead of treating an arrow as merely advisory.
Source: Connecticut Driver's Manual, revised March 2023, Movement Prohibition and Lane Use Control; supplemental painted arrows; printed page 48, physical PDF page 50. Currently linked manual checked September 29, 2026. ↗
Two solid white lines separate your lane from a same-direction lane. How should you treat that boundary?
Correct answer: Do not cross the double solid white lines to change lanes.
Connecticut's manual distinguishes double solid white lines from a single solid white line: the double line prohibits lane changing.
Source: Connecticut Driver's Manual, revised March 2023, Other Markings: double solid white line; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
A broad white stop line is painted before an intersection controlled by a STOP sign. What does that line show?
Correct answer: The position before which you should make the required stop.
The stop line locates the stopping point for the control. Stop before it, then assess the intersection and proceed only when safe.
Source: Connecticut Driver's Manual, revised March 2023, Pavement Markings: Stop-line location; printed page 44, physical PDF page 46. Currently linked manual checked September 29, 2026. ↗
A row of white triangular yield markings is painted before a mid-block crosswalk. What does it identify?
Correct answer: A location where you must yield as required by the crossing control.
Yield markings identify where yielding is required. Check for people using or about to enter the crossing and stop when necessary; the triangles are not a permission to force pedestrians to wait.
Source: Connecticut Driver's Manual, revised March 2023, Yield line; printed page 43, physical PDF page 45. Currently linked manual checked September 29, 2026. ↗
