A non-exempt truck-and-trailer combination has a gross combination weight rating of 32,000 pounds and a trailer GVWR of 12,000 pounds. Which CDL group is required for that combination?
Correct answer: Class A.
This combination meets both Class A thresholds: a GCWR of at least 26,001 pounds and a towed-vehicle GVWR above 10,000 pounds.
Source: Montana CDL Manual, Revised June 2026, MT-2, Definitions - Combination Vehicle (Class A); physical PDF page 2. ↗
A non-exempt straight truck has a GVWR of 30,000 pounds and does not tow a trailer. What is the minimum CDL class that covers it?
Correct answer: Class B.
A single vehicle rated at 26,001 pounds or more falls in Class B. A heavier combination with a trailer over 10,000 pounds is a different classification.
Source: Montana CDL Manual, Revised June 2026, MT-2, Definitions - Heavy Straight Vehicle (Class B); physical PDF page 2. ↗
A non-exempt bus is designed for 17 people, including its driver, and is too light to fall in Class A or B. Which CDL group applies?
Correct answer: Class C, with the required passenger qualification.
Class C includes vehicles outside Classes A and B that are designed for at least 16 people including the driver. The design capacity, not just today's occupancy, matters.
Source: Montana CDL Manual, Revised June 2026, MT-2, Definitions - Small Vehicle (Class C); physical PDF page 2. ↗
Two otherwise qualified Montana applicants want commercial freight jobs: one is 18 and one is 21. Which age boundary does Montana MVD state for its ordinary CDL types?
Correct answer: Intrastate applicants must be at least 18; interstate applicants must be at least 21.
Montana lists age 18 for its Montana-only intrastate CDL and age 21 for its interstate CDL. Meeting the age requirement does not remove other licensing qualifications.
Source: Montana Motor Vehicle Division, Types and Classes - Type 1 Interstate and Type 2 Intrastate; current official source reviewed September 29, 2026. ↗
A Montana applicant has met all CLP issuance requirements. How long does the current manual say the newly issued CLP is valid?
Correct answer: One year from its issue date.
The Montana supplement specifies a one-year CLP. The learner must still obey supervision, vehicle and endorsement limits throughout that period.
Source: Montana CDL Manual, Revised June 2026, MT-2, Commercial License Permit; physical PDF page 2. ↗
A Montana CLP holder is practicing in a commercial truck on public roads. Which supervisor meets the federal accompaniment requirement, assuming that person is otherwise authorized for the trip?
Correct answer: A valid CDL holder with the needed class and endorsements, in the front seat beside the learner and directly supervising.
For this truck practice, the accompanying driver must have the proper CDL group and endorsements and sit beside the learner under observation and direct supervision. A following vehicle or sleeper berth is not sufficient.
Source: Electronic Code of Federal Regulations, 49 CFR 383.25(a)(1), CLP accompaniment; current official source reviewed September 29, 2026. ↗
A Montana applicant finishes the required training seven days after the CLP is issued. May the applicant take the CDL skills test immediately?
Correct answer: No. The CLP must still be held through the required 14-day period.
Training completion does not waive Montana's CLP holding period. The manual requires at least 14 days and says testing may occur on the 15th day.
Source: Montana CDL Manual, Revised June 2026, MT-2, Commercial License Permit - minimum holding period; physical PDF page 2. Federal legal cross-check (reviewed September 29, 2026): 49 CFR 383.25(e), https://www.ecfr.gov/current/title-49/subtitle-B/chapter-III/subchapter-B/part-383/subpart-B/section-383.25. ↗
Which vehicle should a Montana applicant provide for a CDL driving test?
Correct answer: A vehicle in the class sought, in good operating condition, currently registered and insured.
The Montana manual requires the applicant's test vehicle to be within the applied-for class, in good operating condition, registered and insured. It also specifies seatbelts and a passenger seat.
Source: Montana CDL Manual, Revised June 2026, MT-4, Driving Demonstration - test vehicle; physical PDF page 4. ↗
A Montana applicant seeks a first Class A CDL and no ELDT exception applies. When must required training from a registered provider be completed?
Correct answer: Before taking the Class A CDL skills test.
Covered first-time Class A or B applicants must complete the required entry-level training before skills testing. Passing a knowledge test is not a substitute for that training.
Source: Electronic Code of Federal Regulations, 49 CFR 380.603 and 380.605, first Class A or B training; current official source reviewed September 29, 2026. ↗
A CDL holder seeks a hazardous-materials endorsement for the first time and has no ELDT exception. When is the required registered-provider training needed?
Correct answer: Before taking the hazardous-materials endorsement knowledge test.
For a covered first H endorsement, required training precedes the endorsement knowledge test. The timing differs from the skills-test prerequisite used for first Class A or B licenses.
Source: Electronic Code of Federal Regulations, 49 CFR 380.603 and 380.605, first hazardous-materials endorsement; current official source reviewed September 29, 2026. ↗
A first-time Montana hazardous-materials endorsement applicant passes the knowledge test. Is that score alone enough to establish security eligibility?
Correct answer: No. The applicable TSA security threat assessment must also be completed.
Montana's supplement separately requires the federal TSA security threat assessment for hazardous-materials endorsement applicants. A passing knowledge score does not replace it.
Source: Montana CDL Manual, Revised June 2026, MT-2, Hazardous Materials endorsement - Security Threat Assessment; physical PDF page 2. ↗
A driver holds the proper CDL class but has an L restriction. May the driver operate that class of commercial vehicle with air brakes?
Correct answer: No. L prohibits operating an air-braked commercial motor vehicle.
An L restriction limits air-brake-equipped CMV operation. Holding the correct vehicle class alone does not remove the equipment restriction.
Source: Montana CDL Manual, Revised June 2026, MT-2, Air Brake Restriction (L Restriction); physical PDF page 2. ↗
