What distinguishes this warning from a narrow-bridge warning?
Correct answer: The bridge has room for only one lane of traffic.
A ONE LANE BRIDGE warning means opposing vehicles cannot rely on separate usable lanes through the bridge. Slow down and be prepared to yield.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Warning Signs: One Lane Bridge; printed page 25, physical PDF page 35. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What should you expect at a bridge described by this warning?
Correct answer: A bridge with less roadway width than the approach.
The bridge is narrower than the approach. Slow down and assess the available space; do not assume that a wide vehicle and oncoming traffic will fit side by side.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Warning Signs: Narrow Bridge; printed page 25, physical PDF page 35. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What condition is identified by this warning?
Correct answer: The roadway becomes narrower ahead.
ROAD NARROWS warns that the available roadway width decreases. Slow down and assess the narrower section.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Warning Signs: Road Narrows; printed page 25, physical PDF page 35. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What does this advance warning tell you to prepare for?
Correct answer: A school bus stop ahead; begin slowing and watch for the bus and children.
The sign gives advance warning of a school bus stop. It is not itself a bus stop arm or a STOP sign; be ready to obey the actual bus signals and conditions ahead.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Warning Signs: School Bus Stop Ahead; printed page 25, physical PDF page 35. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What should you expect after this orange warning?
Correct answer: A flagger controlling traffic ahead.
The symbol gives advance warning of a flagger. Watch for the actual directions given at the work area; the warning itself is not a STOP paddle.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Construction and Maintenance: Flaggers; printed page 28, physical PDF page 38. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What type of area does this orange warning identify?
Correct answer: A construction or maintenance work area ahead.
Orange identifies construction or maintenance traffic controls. Prepare for workers, changed road conditions and directions within the work area; the illustrated distance is only a standard example.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Construction and Maintenance Signs; printed page 27, physical PDF page 37. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
The diagonal stripes descend toward the right on this barricade. Which side do they direct traffic to pass?
Correct answer: To the right, following the work-zone path.
The manual says stripes sloping down to the right guide traffic to the right. Follow the remaining controls through the work area.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Construction and Maintenance: Devices; printed page 27, physical PDF page 37. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
The diagonal stripes descend toward the left on this barricade. Which side do they direct traffic to pass?
Correct answer: To the left, following the work-zone path.
The stripes guide drivers toward the side on which to pass. Downward-left striping means bear left, while still following the other work-zone controls.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Construction and Maintenance: Devices; printed page 27, physical PDF page 37. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What location is identified by this crossbuck?
Correct answer: A railroad crossing.
The crossbuck is at the railroad crossing. Its presence does not show whether a train is approaching; observe all crossing controls and rail traffic.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Railroad Crossing Warning Signs/Signals: Railroad Cross Buck Signs; printed page 33, physical PDF page 43. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
What is the main purpose of a green sign of this kind?
Correct answer: To provide destination and route guidance.
Green guide signs provide directions and distances to destinations or routes. The example place names in this shared artwork are not Montana destination claims.
Source: FHWA MUTCD 2009, Section 2A.10 and Table 2A-5, common uses of sign colors; current official text read September 29, 2026. National color recognition; no claim to visually inspect Montana manual page 22. ↗
What type of destination does the brown background commonly identify?
Correct answer: A recreational or scenic-area destination.
Brown signs identify public recreation or scenic guidance. The shared example illustrates the color family, not a particular Montana destination.
Source: FHWA MUTCD 2009, Section 2A.10 and Table 2A-5, common uses of sign colors; current official text read September 29, 2026. National color recognition; no claim to visually inspect Montana manual page 22. ↗
A white rectangular sign reads DO NOT PASS. What does it tell you about overtaking an ordinary car here?
Correct answer: Do not overtake that car by passing here.
DO NOT PASS is a regulatory passing restriction. It is distinct from DO NOT ENTER and from a stop control.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Regulatory Signs: DO NOT PASS; printed page 24, physical PDF page 34. Current linked manual text reviewed September 29, 2026. Shared artwork, where shown, is independently sourced, not extracted from this PDF. ↗
Two lanes are separated by a yellow center line. What does the color tell you about their traffic?
Correct answer: The lanes carry traffic in opposite directions.
Yellow center lines separate opposing traffic. The pattern of the lines and the road situation determine whether passing is permitted.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Yellow Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
A white lane line separates two adjacent travel lanes. What does that color normally indicate?
Correct answer: The lanes carry traffic in the same direction.
White lane lines separate same-direction lanes. Their color has a different meaning from yellow center lines separating opposing flows.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Edge and Lane Lines; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
A two-way road has the single broken yellow center line shown. What does the marking permit?
Correct answer: Passing from either direction when the maneuver is otherwise safe and lawful.
A broken yellow center line identifies a passing-permitted section in both directions. It does not remove the need for a clear view, a safe gap, and compliance with other restrictions.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Yellow Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
You are in the lane beside the solid yellow line in this pair. What does that mean for passing a slower car?
Correct answer: You must not cross the center lines for that pass.
The center-line pattern applies according to the line nearest your lane. A solid yellow line on your side prohibits passing across it.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Yellow Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
You are beside the broken yellow line, with a solid yellow line beyond it. How does the marking affect a proposed pass?
Correct answer: Passing may be allowed from your side if traffic, visibility, and other rules permit.
A broken line on your side permits a pass when safe and otherwise lawful. Drivers on the solid-line side do not have the same passing permission.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Yellow Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
What do the two solid yellow center lines tell drivers who want to pass an ordinary car?
Correct answer: Passing across the lines is prohibited in both directions.
Double solid yellow lines establish a no-passing section for both traffic directions. This item concerns overtaking a car, not a separate left-turn maneuver.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Yellow Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
You need to turn left into a driveway across solid yellow center lines, with no sign prohibiting the turn. What does Montana's handbook say?
Correct answer: The lines do not prohibit this driveway turn, but you must wait until it is safe.
Montana expressly permits crossing a solid yellow line for a safe turn into a public or private parking lot, driveway or roadway. That is different from passing an ordinary vehicle across solid center lines.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: Yellow Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
What does the broken white line between the two same-direction lanes indicate?
Correct answer: A lane change is permitted when it can be made safely.
A broken white line allows lane changes but does not give the changing driver priority. Check traffic and signal before crossing it.
Source: Montana Driver Manual, actual cover Revised April 2024 (currently linked May 2026 filename); Pavement Markings: White Lane Markings; printed page 34, physical PDF page 44. Current linked manual text reviewed September 29, 2026. Any diagram is a shared original schematic, not Montana PDF artwork. ↗
