DMV Practice LabAll tests

New Jersey Motorcycle Practice 8

Selected knowledge practice, not a complete licensing course or practical training.

New Jersey Motorcycle Practice 8

Practice mode
Question 1 of 3
  1. 1. On a conventional two-wheel motorcycle with separate front and rear brake controls, you are making an ordinary straight-line stop on clean, dry pavement. How should you begin braking?
  2. 2. While riding upright in a straight line on dry pavement, you need a quick stop on a conventional non-ABS motorcycle. How should you use the front brake?
  3. 3. In a clear practice area at normal riding speed, not walking pace, you need a conventional two-wheel motorcycle to lean quickly to the right. Which handgrip input initiates that lean?
Review all 3 questions with answers
  1. On a conventional two-wheel motorcycle with separate front and rear brake controls, you are making an ordinary straight-line stop on clean, dry pavement. How should you begin braking?

    Correct answer: Apply both brakes together with controlled pressure.

    The manual teaches coordinated use of both brakes, starting them together. Practicing controlled application prepares you to stop effectively; this is not a wheel-lock recovery instruction.

    Source: 2026 NJ Driver Manual, Chapter 10, Control for Safety > Braking/Stopping, printed p.179 / physical PDF p.181; coordinated application bullets. ↗

  2. While riding upright in a straight line on dry pavement, you need a quick stop on a conventional non-ABS motorcycle. How should you use the front brake?

    Correct answer: Squeeze steadily and firmly while also applying the rear brake.

    For a quick stop, the manual calls for a steady, firm squeeze rather than grabbing, with the rear brake applied at the same time. Apply pressure without locking a wheel; emergency skills require qualified practice.

    Source: 2026 NJ Driver Manual, Chapter 10, Know Hazards > Quick Stops, printed p.195 / physical PDF p.197; front-lever application and simultaneous rear brake. ↗

  3. In a clear practice area at normal riding speed, not walking pace, you need a conventional two-wheel motorcycle to lean quickly to the right. Which handgrip input initiates that lean?

    Correct answer: Press forward on the right handgrip.

    At riding speed, pressure on the right handgrip initiates a right lean. The manual explains this control principle for quick turns. It does not make an occupied escape path safe or replace supervised skills practice.

    Source: 2026 NJ Driver Manual, Chapter 10, Know Hazards > Road Hazards, printed p.197 / physical PDF p.199; right-handgrip pressure initiates right lean. See also Turning, printed p.179 / physical p.181. ↗

Report a problem with this question

Question reference: nj-moto-closure-001

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information