DMV Practice LabAll tests

Iowa CDL: additional-topic mistakes

Selected knowledge practice, not a complete licensing course or practical training.

Loading your review list…
Explore sample questions with answers

These public examples are not a selection of your saved mistakes.

Sample practice questions

Practice mode
Question 1 of 12
  1. 1. During a walk-around, you notice new rust streaks extending from wheel nuts. What do they suggest?
  2. 2. Two tires in a dual assembly are touching each other. How should you treat this finding?
  3. 3. You find grease on a truck's brake lining during inspection. What is the appropriate response?
  4. 4. Why is a cracked spring hanger more serious than a comfort problem?
  5. 5. A driver notices an exhaust leak beneath the sleeper area. Why must it be addressed?
  6. 6. Before climbing into a parked truck, which observation deserves investigation?
  7. 7. A driver checks the same vehicle daily. What approach best reduces overlooked inspection items?
  8. 8. A loose tool bag is resting where it could slide under the pedals. When should you secure it?
  9. 9. After a normal pre-trip inspection, the coolant gauge starts rising unusually during the trip. What should the driver do?
  10. 10. A truck's drive wheels begin spinning as the driver accelerates on a wet surface. What is the appropriate immediate adjustment?
  11. 11. Why should a driver pulling a trailer avoid a jerky start?
  12. 12. A manually shifted truck is stopped uphill. When should the driver release a parking brake being used to prevent rollback?
Review all 12 questions with answers
  1. During a walk-around, you notice new rust streaks extending from wheel nuts. What do they suggest?

    Correct answer: The nuts may be loose and their tightness needs checking.

    Rust trails can indicate movement at a wheel nut. Check the assembly rather than dismissing the streaks as cosmetic. The handbook also calls for a tightness recheck after a wheel has recently been changed.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.3 Wheel and Rim Problems; physical PDF page 17 (printed 17); reviewed September 14, 2026. ↗

  2. Two tires in a dual assembly are touching each other. How should you treat this finding?

    Correct answer: As a tire defect to resolve before the vehicle is driven.

    Dual tires should not rub against each other or vehicle components. Matching size and apparently good tread do not cancel the need to investigate contact and correct the unsafe condition.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.3 Tire Problems; physical PDF page 16 (printed 16); reviewed September 14, 2026. ↗

  3. You find grease on a truck's brake lining during inspection. What is the appropriate response?

    Correct answer: Have the brake defect corrected before starting the trip.

    Oil, grease or brake fluid on friction material is a brake defect. A sound drum does not make contaminated lining acceptable, and the parking brake is not a substitute for a safe service-brake system.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.3 Bad Brake Drums or Shoes; physical PDF page 17 (printed 17); reviewed September 14, 2026. ↗

  4. Why is a cracked spring hanger more serious than a comfort problem?

    Correct answer: It can allow the axle to move out of its proper position.

    The suspension supports the vehicle and load while keeping axles correctly positioned. Damaged hangers or related mounting parts can threaten control and require attention, even before several spring leaves have failed.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.3 Suspension System Defects; physical PDF page 17 (printed 17); reviewed September 14, 2026. ↗

  5. A driver notices an exhaust leak beneath the sleeper area. Why must it be addressed?

    Correct answer: Poisonous exhaust can enter the cab or sleeper.

    A damaged exhaust system can let poisonous fumes into occupied spaces. Check leaking or unsecured exhaust components and have the defect corrected; opening a window is not a repair.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.3 Exhaust System Defects; physical PDF page 18 (printed 18); reviewed September 14, 2026. ↗

  6. Before climbing into a parked truck, which observation deserves investigation?

    Correct answer: A fresh fluid puddle under the engine area.

    The approach inspection looks for clues such as fresh leaks, damage or an unusual lean, as well as people and obstacles around the vehicle. Investigate a fresh puddle instead of discovering the problem after departure.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.5 Approaching the Vehicle; physical PDF page 18 (printed 18); reviewed September 14, 2026. ↗

  7. A driver checks the same vehicle daily. What approach best reduces overlooked inspection items?

    Correct answer: Use a consistent inspection routine on each trip.

    A repeatable method helps prevent omissions. Familiarity with a vehicle or a trouble-free previous trip does not show that its current condition is safe.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.5 Method of Inspection; physical PDF page 18 (printed 18); reviewed September 14, 2026. ↗

  8. A loose tool bag is resting where it could slide under the pedals. When should you secure it?

    Correct answer: Before moving, so it cannot obstruct the controls.

    Loose cab objects can interfere with driving controls or strike occupants in a crash. Secure them before driving rather than relying on their current position.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.5 Get In Vehicle; physical PDF page 22 (printed 22); reviewed September 14, 2026. ↗

  9. After a normal pre-trip inspection, the coolant gauge starts rising unusually during the trip. What should the driver do?

    Correct answer: Respond to the warning and investigate at a safe stopping place.

    Pre-trip inspection is not the end of monitoring. Watch instruments and use sight, sound, smell and feel for developing problems; do not let a reassuring earlier check override a new warning.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.1.6 Inspection during a Trip; physical PDF page 22 (printed 22); reviewed September 14, 2026. ↗

  10. A truck's drive wheels begin spinning as the driver accelerates on a wet surface. What is the appropriate immediate adjustment?

    Correct answer: Ease off the accelerator to reduce the spinning.

    Too much driving power for the available traction can make the wheels spin and threaten control. Reduce acceleration and build speed gradually when grip is poor.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.2.1 Accelerating; physical PDF page 23 (printed 23); reviewed September 14, 2026. ↗

  11. Why should a driver pulling a trailer avoid a jerky start?

    Correct answer: It can place damaging loads on the coupling and drivetrain.

    A smooth, gradual start protects the coupling and other mechanical components and helps maintain control. A harsh surge is not a useful way to test a connection.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.2.1 Accelerating; physical PDF page 23 (printed 23); reviewed September 14, 2026. ↗

  12. A manually shifted truck is stopped uphill. When should the driver release a parking brake being used to prevent rollback?

    Correct answer: When enough engine power is applied to prevent rolling backward.

    Coordinate the clutch, power and brakes so the vehicle does not roll backward into someone behind it. When using the parking brake for this purpose, release it after sufficient power is available.

    Source: Colorado Commercial Driver License Manual (06/15/23), Section 2; 2.2.1 Accelerating; physical PDF page 23 (printed 23); reviewed September 14, 2026. ↗

Report a problem with this question

Question reference: ia-cdl-expanded-general-005

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information