This eight-sided sign faces your lane. What must you do before proceeding?
Correct answer: Stop completely, then proceed when it is safe.
A STOP sign requires a complete stop, including when the intersection looks empty. Check for traffic and pedestrians before moving.
Source: Tennessee Comprehensive Driver License Manual (publication notice July 1, 2022; file retrieved September 14, 2026), printed page 36 (physical PDF 50) — Octagon Shape — Stop. ↗
You approach a YIELD sign while vehicles are crossing your intended path. What should you do?
Correct answer: Slow down and stop if necessary to give way.
Yielding means allowing conflicting traffic to go first. You must stop when slowing alone will not provide a safe gap.
Source: Tennessee Comprehensive Driver License Manual (publication notice July 1, 2022; file retrieved September 14, 2026), printed page 36 (physical PDF 50) — Triangular Shape — Yield. ↗
The pictured sign faces your car at a ramp entrance. Is the ramp available to you from this end?
Correct answer: No; entry from this direction is prohibited.
DO NOT ENTER is used to prevent entry in the wrong direction. An empty ramp or a navigation instruction does not make entry permitted.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.46, printed page 109 (physical PDF 150). ↗
You see this red rectangular sign facing you on a one-way roadway. What does it tell you?
Correct answer: You are headed against the permitted traffic direction.
WRONG WAY supplements DO NOT ENTER. It warns that your direction of travel conflicts with the direction allowed on the roadway.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.47, printed page 110 (physical PDF 151). ↗
Which maneuver is prohibited by the arrow and red slash in this sign?
Correct answer: Turning around to travel in the opposite direction.
The curved arrow that doubles back, crossed by a red circle and slash, means No U-Turn. Do not confuse it with the angled arrow on a No Left Turn sign.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.26, printed page 89 (physical PDF 130). ↗
At an intersection with this sign and no exception plaque, which choice is prohibited?
Correct answer: Making a right turn from this approach.
The red slash crosses a right-turn arrow. It prohibits that turn from the approach; waiting for a gap does not remove the restriction.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.26, printed page 89 (physical PDF 130). ↗
The sign shown applies to your intersection approach. What is its message?
Correct answer: Do not make a left turn here.
A left-turn arrow under a red circle and slash prohibits a left turn. A required-turn sign instead shows an uncrossed arrow and the word ONLY.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.26, printed page 89 (physical PDF 130). ↗
What does this plain rectangular sign prohibit at the intersection?
Correct answer: Turning movements from this approach.
NO TURNS is a movement-prohibition sign. It is not an instruction to stop and then turn, and it is not limited to a particular one-way destination.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.26, printed page 89 (physical PDF 130). ↗
The pictured arrow and ONLY sign is above your lane. Which movement is required from that lane?
Correct answer: Turn left through the intersection.
A mandatory lane-control sign specifies one required movement. The left arrow with ONLY designates a left-turn-only lane, not an optional through lane.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.28, printed page 92 (physical PDF 133). ↗
An upward arrow with ONLY is posted over your lane. How must that lane be used?
Correct answer: Proceed straight through the intersection.
The straight arrow with ONLY designates a through-only lane. It does not grant permission to make a turn from that lane.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.28, printed page 93 (physical PDF 134). ↗
This sign is above a single approach lane. Which movements does it allow from that lane?
Correct answer: Straight ahead or left.
The two arrow branches indicate the permitted movements: straight and left. It is an optional-movement sign, so the lane is not restricted to only a left turn.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.29, printed page 93 (physical PDF 134). ↗
You are in the left lane as you reach the intersection governed by this sign. What must that lane do?
Correct answer: Make the indicated left turn.
LEFT LANE MUST TURN LEFT designates the required movement for the left lane. A green signal does not turn it into a through lane.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.28, printed page 92 (physical PDF 133). ↗
What does the number on this white SPEED LIMIT sign represent?
Correct answer: The posted maximum speed in miles per hour.
A SPEED LIMIT sign states the legal speed limit, not a curve advisory or a route distance. The number shown is an example of a posted limit, not a Tennessee statewide default.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.21, printed page 85 (physical PDF 126). ↗
This MINIMUM SPEED 40 plaque is mounted beneath a speed-limit sign. What does the 40 identify?
Correct answer: The posted minimum legal speed in mph.
A MINIMUM SPEED plaque identifies the posted minimum legal speed and is used with a maximum-speed sign. It is not a night limit or a curve advisory. The illustration shows only the plaque.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.24, printed page 87 (physical PDF 128). ↗
What should you expect beyond the pictured warning sign on the main road?
Correct answer: Traffic from the right joins a shared lane.
The branch joining the main arrow indicates a merge from the right. Unlike an Added Lane sign, it warns that the converging traffic will share a lane.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.45, printed page 183 (physical PDF 224). ↗
How does this sign differ from a merge warning?
Correct answer: The entering roadway adds a separate lane.
The two distinct arrows separated by a dashed line indicate an added lane. The roadways converge without requiring a merge at that point.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.46, printed page 183 (physical PDF 224). ↗
You are traveling in the right lane when this sign appears. What roadway change does it warn of?
Correct answer: The right lane ends ahead.
The right-side line bends toward the continuing lane, indicating a reduction in lanes. This is a lane-ending warning, not traffic entering from a separate roadway.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.47, printed page 183 (physical PDF 224). ↗
What does the pair of arrows pointing in opposite directions warn you about?
Correct answer: Traffic moving in both directions on the roadway.
The downward and upward arrows identify two-way traffic. Do not interpret them as two same-direction lanes or a turn-choice sign.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.51, printed page 189 (physical PDF 230). ↗
What restriction begins where this yellow pennant is installed?
Correct answer: A no-passing zone.
The pennant-shaped NO PASSING ZONE sign marks the beginning of a no-passing zone. Its shape and message are different from a lane-ending or one-way sign.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.53, printed page 190 (physical PDF 231). ↗
What does this word-message warning tell a driver in the right lane?
Correct answer: The right traffic lane ends ahead.
RIGHT LANE ENDS warns of a reduction in the number of traffic lanes. It does not mean merely a shoulder closure or a mandatory freeway exit.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.47, printed page 183 (physical PDF 224). ↗
What does the small red octagon inside this yellow diamond mean?
Correct answer: A stop sign controls the road farther ahead.
This is Stop Ahead, an advance warning. It prepares you for the actual STOP control ahead; the yellow warning sign is not itself the stop location.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.35, printed page 177 (physical PDF 218). ↗
Why is a yield-shaped symbol shown inside this yellow warning sign?
Correct answer: A yield control is located ahead.
Yield Ahead warns you to prepare for the yield control farther along your approach. It does not give your vehicle priority over crossing traffic.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.35, printed page 177 (physical PDF 218). ↗
The sign in the image warns of which feature farther along the road?
Correct answer: A traffic signal controlling the road ahead.
Signal Ahead gives advance notice of traffic lights. It does not tell you which light will be showing when you arrive; respond to the actual signal.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.35, printed page 177 (physical PDF 218). ↗
Which surface change is this sign warning you to expect?
Correct answer: The road has a sharp rise ahead.
BUMP warns of a sharp rise in the roadway profile. A DIP sign warns of a depression; PAVEMENT ENDS describes a surface-material change.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.26, printed page 173 (physical PDF 214). ↗
What road shape does the pictured sign identify?
Correct answer: A sharp depression in the roadway.
DIP warns of a depression in the road profile. It is a surface warning rather than a lane-use instruction or a speed-limit sign.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.26, printed page 173 (physical PDF 214). ↗
What change should you expect after this sign?
Correct answer: The paved road changes to an unpaved surface.
PAVEMENT ENDS warns that the paved surface changes to gravel-treated or earth roadway. It does not necessarily mean the road itself terminates.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.28, printed page 173 (physical PDF 214). ↗
Which area and condition does the pictured sign warn about?
Correct answer: Soft ground on the road shoulder.
SOFT SHOULDER identifies a shoulder condition. It is not a statement that every traffic lane is unpaved or that a new numerical speed limit begins.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.29, printed page 173 (physical PDF 214). ↗
What hazard is represented by the car and winding tracks on this sign?
Correct answer: Unexpected slippery roadway conditions.
The skidding-car symbol warns of slippery conditions, commonly when wet. Its winding tracks do not represent a curving route or lane-change arrows.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.30, printed page 175 (physical PDF 216). ↗
What is the message of this yellow ROAD MAY FLOOD sign?
Correct answer: The road ahead is subject to flooding.
ROAD MAY FLOOD warns that a roadway section is subject to frequent flooding. The sign is a hazard warning, not permission or assurance that standing water is safe to cross.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.34, printed page 176 (physical PDF 217). ↗
What does the 1000 FT on this orange sign tell you?
Correct answer: Road work is approximately 1,000 feet ahead.
ROAD WORK with a distance is an advance warning of work-related obstructions or restrictions ahead. The distance is not the length of the work zone or a speed limit.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 6H.03, printed page 802 (physical PDF 843). ↗
You see the pictured orange sign before a work area. What should you expect?
Correct answer: A flagger controlling traffic ahead.
The flag-holding figure indicates a flagger ahead who controls traffic through the work area. The warning is not itself a command to pass another vehicle.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 6H.15, printed page 806 (physical PDF 847). ↗
What road alignment does the curved arrow on this yellow sign warn about?
Correct answer: A curve to the left ahead.
The Curve sign follows the direction of the roadway ahead. This arrow bends left; it is not a merging-lane or side-road symbol.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.07, printed page 155 (physical PDF 196); W1-2 illustration in Figure 2C-1, physical page 194. ↗
What should you expect after the pictured winding-arrow warning?
Correct answer: A series of curves in the road.
The Winding Road sign warns of a series of changes in road alignment. Do not confuse its single winding arrow with the skidding-car symbol used for slippery conditions.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.07 paragraph 5, printed page 155 (physical PDF 196); W1-5 illustration in Figure 2C-1, physical page 194. ↗
A series of these yellow-and-black chevrons lines the outside of a curve. What do they show?
Correct answer: The direction the roadway curves.
Chevron Alignment signs give added guidance through a turn or curve. These point left to show the alignment; they are not stop controls or permission to pass.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.08, printed page 158 (physical PDF 199); W1-8 illustration in Figure 2C-1, physical page 194. ↗