What change in available road width should you expect?
Correct answer: A narrower roadway ahead
This warning concerns the width of the road ahead, not vehicle height or a complete closure.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.17, W5-1; printed page 169, physical PDF page 210. ↗
What vehicle dimension should you check after seeing this sign?
Correct answer: Vertical clearance
Opposing vertical arrows and a height identify a clearance warning. The number on this example is not the clearance of every bridge or overhead obstruction.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.25, W12-2; printed page 172, physical PDF page 213. ↗
What road classification change is approaching?
Correct answer: The freeway ends one mile ahead
Read both the road-status message and the distance. The one-mile wording is an example of an advance warning, not a universal distance.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.22, W19-1; printed page 171, physical PDF page 212. ↗
What surface feature is ahead?
Correct answer: A raised irregularity in the road
A bump is a raised surface irregularity. Compare it with DIP, which identifies a depression.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.26, W8-1; printed page 173, physical PDF page 214. ↗
Which part of the roadway may not support your vehicle normally?
Correct answer: The shoulder beside the travel lane
The warning applies to the shoulder surface beside the traveled roadway. It is not an invitation to use that area as an extra lane.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.29, W8-4; printed page 173, physical PDF page 214. ↗
What should you be alert for at the edge of the pavement?
Correct answer: A lower shoulder next to the pavement edge
The pictured symbol warns of a lower shoulder beside the pavement, rather than a required lane maneuver.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.29, W8-17; printed page 173, physical PDF page 214. ↗
Crossing traffic has priority as you approach this triangular sign. What should you do?
Correct answer: Slow down and stop if needed to give way.
YIELD means give way to conflicting traffic. Slowing may be sufficient, but you must stop when necessary to avoid interfering with traffic that has priority.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2B.05, R1-2; printed page 74, physical PDF page 115. ↗
Two adjacent lanes are separated by a normal broken white line. What does this marking tell you?
Correct answer: They carry the same direction and may be crossed with care
A broken white lane line separates same-direction traffic and permits a careful lane change when otherwise legal and safe.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.06, paragraphs 01 and 05; printed page 546, physical PDF page 587. ↗
Two solid yellow lines separate opposing traffic on a two-lane road. What type of passing-zone marking is shown?
Correct answer: A no-passing zone in both directions
Double solid yellow is the two-direction no-passing-zone marking. It is not a separate travel lane, and this identification does not describe every legal crossing exception.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.01, paragraph 04C; printed page 540, physical PDF page 581. ↗
A wide dotted white line begins beside your freeway lane as signs announce that the lane exits ahead. What should you recognize?
Correct answer: The lane function is changing rather than continuing through
Wide dotted lane-drop markings distinguish a non-continuing lane. Read the signs and make any permitted lane change early and safely.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.07, paragraph 07A; printed page 553, physical PDF page 594. ↗
A center lane has solid-and-broken yellow boundaries and left-turn arrows for both directions. Is it a through lane for overtaking a queue?
Correct answer: No; it is provided for left-turn maneuvers
A two-way left-turn lane is shared by left-turning traffic from either direction. It is not an extra through or passing lane.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.05, paragraph 01; printed page 543, physical PDF page 584. ↗
A row of white triangles points toward approaching vehicles beneath a yield control. What does that row mark?
Correct answer: The point at which vehicles are intended to yield
These triangles form a yield line. They identify the yielding point associated with the control rather than a speed hump.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.19, paragraph 10; printed page 573, physical PDF page 614. ↗
A bicycle symbol with two chevrons is painted within the ordinary travel lane. Does this make the lane bicycle-exclusive?
Correct answer: No; it reminds users that bicycles and motor vehicles share it
A sharrow is a shared-lane marking, not a separately reserved bike lane. Expect bicyclists and give them appropriate space.
Source: Ohio Driver Training Curriculum, ODOT insert, Sharrows or bicycle markings; printed page 87, physical PDF page 98. ↗
Before turning across a two-way cycle track beside a street, where should you check for bicycles?
Correct answer: In both directions along the cycle track
The cycle track can carry bicycle traffic both ways. Motor-vehicle direction alone does not tell you where a bicycle may approach.
Source: Ohio Driver Training Curriculum, ODOT insert, Two-way cycle track; printed page 86, physical PDF page 97. ↗
Debris blocks a bicycle lane and its rider prepares to move into the traffic lane. What should you understand?
Correct answer: A bike lane does not require the rider to remain in that hazard
Ohio’s guide explains that bicyclists may leave a bike lane, including to avoid debris or prepare a left turn. Stay alert and share the roadway safely.
Source: Ohio Driver Training Curriculum, ODOT insert, Bike-lane use and debris; printed page 85, physical PDF page 96. ↗
An intersection box carries KEEP CLEAR markings and a matching sign. What is their purpose?
Correct answer: To keep vehicles from stopping where they would block crossing traffic
Do-not-block markings identify an area that must remain available for crossing movements. Do not enter a queue that leaves your car trapped there.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.26, paragraphs 01–03; printed page 581, physical PDF page 622. ↗
A pedestrian hybrid beacon is in its normal dark, inactive phase, with no person crossing. Is darkness by itself evidence that this beacon has failed?
Correct answer: No; this beacon normally stays dark between activations
Unlike an ordinary three-color intersection signal, a pedestrian hybrid beacon is normally dark between activations. Continue cautiously and obey applicable pedestrian duties.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 4J.03, paragraph 01; Figure 4J-3; printed page 729, physical PDF page 770. ↗
Both red lights on a pedestrian hybrid beacon are steady. What is required of approaching traffic?
Correct answer: Stop and remain stopped for that indication
Steady red is the stop phase while pedestrians cross. It is different from the later alternating-flashing-red stage.
Source: Ohio Driver Training Curriculum, ODOT insert, HAWK driver sequence, step 4; printed page 88, physical PDF page 99. ↗
What setting is commonly indicated by a black message on an orange temporary warning sign?
Correct answer: Road work or temporary traffic control
Orange is associated with temporary traffic control, including work zones. Read the specific instruction rather than relying only on color.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2A.07, Table 2A-2, Temporary Traffic Control; printed page 44, physical PDF page 85. ↗
A blue sign shows symbols for facilities available to road users. What kind of information is it generally giving?
Correct answer: Motorist services such as fuel, lodging or a hospital
Blue is commonly used for road-user service information. The symbol or wording identifies the actual facility.
Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2A.07, Table 2A-2, Road User Service; printed page 44, physical PDF page 85. ↗
