DMV Practice LabAll tests

Ohio Practice Test 15

Ohio Practice Test 15

Practice mode
Question 1 of 20
  1. 1. What should you anticipate at the bridge ahead?
    Yellow diamond with black NARROW BRIDGE lettering.
  2. 2. What does this sign tell you about continuing along this road?
    Yellow diamond with black DEAD END lettering.
  3. 3. What must traffic on this roadway prepare to do?
    Yellow rectangle with ALL TRAFFIC MUST EXIT lettering.
  4. 4. How does the road surface change here?
    Yellow diamond with black DIP lettering.
  5. 5. What difference between neighboring lane surfaces should you expect?
    Yellow diamond with black UNEVEN LANES lettering.
  6. 6. Which assumption should you avoid after seeing this sign?
    Yellow diamond with black NEW TRAFFIC PATTERN AHEAD lettering.
  7. 7. What does this pennant-shaped sign mark?
    Yellow right-pointing triangular sign with a black border and three lines of black text.
  8. 8. A solid yellow center line is next to your lane and a broken yellow line is beyond it. Which direction is marked as the no-passing side?
  9. 9. A single solid white line separates two same-direction lanes. Compared with a broken white line, what does it communicate?
  10. 10. A continuous white line runs along the right edge of the traveled roadway. What does that edge line identify?
  11. 11. Before entering a two-way left-turn lane for a driveway, what traffic may also use that lane?
  12. 12. Your lane has a combined straight-ahead and left-turn arrow, with matching signs and no other restriction. Which movements does it identify?
  13. 13. A striped buffer separates a bicycle lane from the neighboring motor-vehicle lane. What is the buffer intended to provide?
  14. 14. The light is red and a marked bike box lies ahead of the motor-vehicle stop line. Where should you wait?
  15. 15. White chevrons fill the triangular neutral area between a freeway and its exit ramp. How should you treat that area?
  16. 16. A steady downward green arrow is displayed over a controlled lane. What does it mean?
  17. 17. A pedestrian hybrid beacon begins flashing yellow after someone activates it. What should you do?
  18. 18. A pedestrian hybrid beacon is flashing red alternately. The car ahead stops and goes, and the crosswalk is clear. What must you do?
  19. 19. A temporary roadside sign uses a fluorescent pink background. What type of situation does that color commonly identify?
  20. 20. A brown guide sign with white lettering points toward a park or historic site. What category of destination does it identify?
Review all 20 questions with answers
  1. What should you anticipate at the bridge ahead?

    Correct answer: A bridge with a narrower roadway

    NARROW BRIDGE warns about the roadway width at the bridge. It is different from a drawbridge or clearance warning.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.18, W5-2; printed page 170, physical PDF page 211. ↗

  2. What does this sign tell you about continuing along this road?

    Correct answer: The road ends rather than continuing through

    DEAD END identifies a road that terminates. It is not a sign directing traffic to a new through route.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.24, W14-1; printed page 171, physical PDF page 212. ↗

  3. What must traffic on this roadway prepare to do?

    Correct answer: Prepare to leave the roadway using the indicated exit route

    The message applies to all traffic, rather than only vehicles already in an optional exit lane. Follow the posted route rather than assuming a through route remains available.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.22, W19-5; printed page 171, physical PDF page 212. ↗

  4. How does the road surface change here?

    Correct answer: A depression in the road surface

    DIP warns of a low depression in the roadway rather than a raised bump or a change in lane count.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.26, W8-2; printed page 173, physical PDF page 214. ↗

  5. What difference between neighboring lane surfaces should you expect?

    Correct answer: Adjacent lane surfaces at different levels

    The warning refers to a difference in lane-surface elevation, not a difference in speed limits or who may use each lane.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.30, W8-11; printed page 175, physical PDF page 216. ↗

  6. Which assumption should you avoid after seeing this sign?

    Correct answer: That the old lane arrangement still applies

    The warning alerts familiar drivers as well as new visitors to a changed arrangement ahead. Pay attention to current signs and markings instead of relying on memory.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.38, W23-2; printed page 178, physical PDF page 219. ↗

  7. What does this pennant-shaped sign mark?

    Correct answer: The beginning of a no-passing zone

    The pennant marks the beginning of a no-passing zone and is placed on the left side of the road.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2C.53, W14-3; printed page 190, physical PDF page 231. ↗

  8. A solid yellow center line is next to your lane and a broken yellow line is beyond it. Which direction is marked as the no-passing side?

    Correct answer: Your direction, beside the solid line

    The solid side marks the no-passing direction. This question identifies the marking, not a special Ohio statutory passing exception.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.01, paragraph 04B; printed page 540, physical PDF page 581. ↗

  9. A single solid white line separates two same-direction lanes. Compared with a broken white line, what does it communicate?

    Correct answer: Crossing between those lanes is discouraged

    A solid white lane line discourages crossing. Do not confuse that standard meaning with double solid white lines, which prohibit crossing. Other controls still apply.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.06, paragraph 06; printed page 546, physical PDF page 587. ↗

  10. A continuous white line runs along the right edge of the traveled roadway. What does that edge line identify?

    Correct answer: The right-hand boundary of the roadway

    The white edge line outlines the right roadway edge. It does not make the shoulder a normal additional traffic lane.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.09, paragraph 02; printed page 562, physical PDF page 603. ↗

  11. Before entering a two-way left-turn lane for a driveway, what traffic may also use that lane?

    Correct answer: A driver from the opposite direction preparing a left turn

    The lane serves left turns from both directions. Check its full shared space and do not assume it belongs exclusively to your approach.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.05, paragraph 01; printed page 543, physical PDF page 584. ↗

  12. Your lane has a combined straight-ahead and left-turn arrow, with matching signs and no other restriction. Which movements does it identify?

    Correct answer: Straight ahead or left

    Lane-use arrows indicate the permitted or required movements. A combined straight-and-left arrow offers those two choices, subject to signals and yielding duties.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.23, paragraph 01; Figure 3B-21; printed page 578, physical PDF page 619. ↗

  13. A striped buffer separates a bicycle lane from the neighboring motor-vehicle lane. What is the buffer intended to provide?

    Correct answer: Additional separation between the traffic spaces

    A buffer adds separation beside the bicycle lane. It is not another general-purpose lane.

    Source: Ohio Driver Training Curriculum, ODOT insert, Buffered bike lanes; printed page 85, physical PDF page 96. ↗

  14. The light is red and a marked bike box lies ahead of the motor-vehicle stop line. Where should you wait?

    Correct answer: Behind the box at the designated motor-vehicle stop line

    Leave the marked bike box available to bicyclists waiting ahead of traffic. Stop behind it rather than occupy the reserved space.

    Source: Ohio Driver Training Curriculum, ODOT insert, Bike box; printed page 86, physical PDF page 97. ↗

  15. White chevrons fill the triangular neutral area between a freeway and its exit ramp. How should you treat that area?

    Correct answer: Keep to the traffic lanes instead of driving through it

    Chevron markings discourage travel through a neutral area. Follow the actual lanes and avoid a last-second cut across the gore.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 3B.25, paragraph 01; printed page 578, physical PDF page 619. ↗

  16. A steady downward green arrow is displayed over a controlled lane. What does it mean?

    Correct answer: That lane is open to travel in your direction

    An overhead lane-use arrow concerns the lane below it. It does not grant priority at every intersection farther ahead.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 4T.02, paragraph 01A; printed page 754, physical PDF page 795. ↗

  17. A pedestrian hybrid beacon begins flashing yellow after someone activates it. What should you do?

    Correct answer: Slow and pay attention to the crossing

    Flashing yellow alerts drivers to the activated crossing. Reduce speed and be ready for the next signal indication.

    Source: Ohio Driver Training Curriculum, ODOT insert, HAWK driver sequence, step 2; printed page 88, physical PDF page 99. ↗

  18. A pedestrian hybrid beacon is flashing red alternately. The car ahead stops and goes, and the crosswalk is clear. What must you do?

    Correct answer: Make your own stop, then proceed cautiously if clear

    Each arriving driver must stop. After stopping, proceed cautiously only when the crossing is clear; another driver’s stop does not count for yours.

    Source: Ohio Driver Training Curriculum, ODOT insert, HAWK driver sequence, step 5; ORC 4511.13(F),(H); printed page 88, physical PDF page 99. ↗

  19. A temporary roadside sign uses a fluorescent pink background. What type of situation does that color commonly identify?

    Correct answer: Traffic incident management

    Fluorescent pink is used for incident-management signs. Follow the message and remain alert for responders and changed traffic conditions.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2A.07, Table 2A-2, Incident Management; printed page 44, physical PDF page 85. ↗

  20. A brown guide sign with white lettering points toward a park or historic site. What category of destination does it identify?

    Correct answer: A recreational or cultural-interest destination

    Brown guide signs are used for recreational and cultural-interest destinations, rather than a general traffic-lane restriction.

    Source: FHWA MUTCD, 11th Edition with Revision 1 (December 2025), Section 2A.07, Table 2A-2, Recreational; printed page 44, physical PDF page 85. ↗

Report a problem with this question

Question reference: oh-visual-002

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information

20 questions. Read the explanation after each answer and continue at your own pace.