DMV Practice LabAll tests

Utah: Truck, bicycle and motorcycle hazards

Utah: Truck, bicycle and motorcycle hazards

Practice mode
Question 1 of 8
  1. 1. You plan to turn right after passing a bicyclist. What should you check before crossing the bicyclist’s path?
  2. 2. A wide farm vehicle ahead slows near an unmarked field entrance. What is the best response?
  3. 3. You need to leave a highway, but doing so now would require cutting closely in front of a tractor-trailer. What is the safer choice?
  4. 4. A heavily loaded truck accelerates slowly away from a stop. How should you respond behind it?
  5. 5. Before turning across the path of an approaching tractor-trailer, what mistake should you avoid?
  6. 6. You see children riding bicycles between parked vehicles in a neighborhood. What should you anticipate?
  7. 7. On a narrow road, a cyclist appears unaware that you are behind. If a warning is needed, how should you use your horn?
  8. 8. Why should you search carefully for bicycles near the road edge at night?
Review all 8 questions with answers
  1. You plan to turn right after passing a bicyclist. What should you check before crossing the bicyclist’s path?

    Correct answer: Look beside and behind, and wait if the turn would cut off the bicyclist.

    A bicyclist can reach the intersection while you are preparing to turn. Check for the rider and do not turn across the rider’s path unsafely.

    Source: Iowa Driver's Manual, MM1170 07/23/2026; printed page 58, physical PDF page 58; Sharing the road with bicycles. Readable text only; no diagram interpretation used. ↗

  2. A wide farm vehicle ahead slows near an unmarked field entrance. What is the best response?

    Correct answer: Stay back and allow room for an unexpected or wide turn.

    Farm equipment may turn into field entrances that are difficult to see. Its width and turning path require patience and extra space.

    Source: Iowa Driver's Manual, MM1170 07/23/2026; printed page 56, physical PDF page 56; Rural driving. Readable text only; no diagram interpretation used. ↗

  3. You need to leave a highway, but doing so now would require cutting closely in front of a tractor-trailer. What is the safer choice?

    Correct answer: Let the truck continue ahead and use a safe gap or a later exit.

    A truck needs its open space to slow down. Missing an exit is preferable to taking away that space with a sudden close merge.

    Source: Arkansas Driver License Study Guide, Volume 1, Edition 10, July 2026 (07222026); Maneuverability: stopping cushion; printed page 66, physical PDF page 78. Checked September 22, 2026. ↗

  4. A heavily loaded truck accelerates slowly away from a stop. How should you respond behind it?

    Correct answer: Be patient and keep an adequate following gap.

    Large vehicles need time to gain speed because of their weight. Pressuring the driver does not create a safe passing opportunity.

    Source: FMCSA: Be Patient; official source checked September 22, 2026. ↗

  5. Before turning across the path of an approaching tractor-trailer, what mistake should you avoid?

    Correct answer: Assuming its large appearance means it is moving slowly.

    The size of a truck can mislead your estimate of its approach. If there is not a clearly safe gap, wait rather than forcing the truck to brake.

    Source: Arkansas Driver License Study Guide, Volume 1, Edition 10, July 2026 (07222026); Maneuverability: judging an approaching truck; printed page 66, physical PDF page 78. Checked September 22, 2026. ↗

  6. You see children riding bicycles between parked vehicles in a neighborhood. What should you anticipate?

    Correct answer: A rider may enter the roadway suddenly without checking traffic.

    Obstructions may hide a child until very late. Reduce speed as needed and stay ready to respond to an unexpected movement.

    Source: Arkansas Driver License Study Guide, Volume 1, Edition 10, July 2026 (07222026); Residential Areas Are Danger Zones; printed page 68, physical PDF page 80. Checked September 22, 2026. ↗

  7. On a narrow road, a cyclist appears unaware that you are behind. If a warning is needed, how should you use your horn?

    Correct answer: Give a brief, gentle tap without startling the rider.

    A short warning may alert the rider to your presence. It does not create extra road width or justify intimidating the cyclist into an unsafe position.

    Source: Arkansas Driver License Study Guide, Volume 1, Edition 10, July 2026 (07222026); Safety Tips: audible warning; printed page 67, physical PDF page 79. Checked September 22, 2026. ↗

  8. Why should you search carefully for bicycles near the road edge at night?

    Correct answer: They can be hard to see, especially in glare from approaching traffic.

    Do not assume the absence of a car-sized light means the path is empty. A rider can be difficult to distinguish among headlights and roadside shadows.

    Source: Arkansas Driver License Study Guide, Volume 1, Edition 10, July 2026 (07222026); Residential Areas: nighttime bicycle visibility; printed page 68, physical PDF page 80. Checked September 22, 2026. ↗

Report a problem with this question

Question reference: ut-car-expanded-ia-car-048

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information