As your bus approaches a railroad crossing, students are talking loudly and the radio is playing. What preparation helps you hear and assess rail traffic?
Correct answer: Request quiet and turn off noise-producing equipment before the crossing check.
Reducing noise and distraction supports the visual and listening check. The older guide specifically calls for silence and shutting off the radio and heaters during preparation.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 25, physical PDF page 205; Part III — Safe Operating Procedures > Railroad Grade Crossings > Prepare to Stop. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
A train has just passed across a multi-track crossing, but it still blocks your view of the next track. What should determine when you proceed?
Correct answer: Wait until the other tracks are visible and check that no second train is approaching.
A departing train can hide another train. Do not treat the first train's passage as proof that all tracks are clear.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 26, physical PDF page 206; Part III > Railroad Grade Crossings > Multi-Track Crossings. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
Traffic is stopped just beyond a railroad crossing, leaving too little room for your entire bus on the far side. What is the safe decision?
Correct answer: Wait before the tracks until there is enough clear space for the whole bus beyond them.
Crossing space must accommodate the full bus, not just its front. A nearby traffic control or queue can otherwise leave the rear of the bus exposed to a train.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 27, physical PDF page 207; Part III > Railroad Traffic Control Devices > Important Note: traffic control beyond the crossing. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
Your bus becomes immobilized on railroad tracks and cannot move clear immediately. What has priority?
Correct answer: Evacuate passengers immediately away from the bus and tracks.
A stalled or trapped bus on tracks is an immediate exposure to rail traffic. The guide calls for evacuation, not keeping passengers aboard while trying to recover the vehicle.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 27, physical PDF page 207; Part III > Railroad Traffic Control Devices > stalled or trapped bus. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
An approaching train looks slow because it is large and still some distance away. Why is trying to get the bus across ahead of it a poor judgment?
Correct answer: A train's apparent speed can be misleading; its size can make it look slower than it is.
The older guide warns that a train's size can distort the driver's speed judgment. Do not base a crossing attempt on the impression that it is moving slowly.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 28, physical PDF page 208; Part III > Railroad Grade Crossing Facts. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
Your bus is stopped for waiting students, but a vehicle is still moving toward the boarding area. What should you do before inviting students to approach?
Correct answer: Keep students back and verify traffic is stopped before signaling them forward.
Stopping the bus does not by itself establish a safe boarding area. The guide calls for a final traffic check before the driver opens the door and signals students to approach.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 30, physical PDF page 210; Part III > Loading Procedures > Prepare to Stop, final traffic check. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
Several children were waiting at a stop, but one cannot be accounted for after boarding. What should the driver do before moving the bus?
Correct answer: Keep the bus stopped, secure it, remove the key, and get out to locate the child, including checking underneath.
Do not move a bus while a child from the stop is unaccounted for. The guide directs a secured-bus search, including the area underneath, rather than relying on assumptions.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 31, physical PDF page 211; Part III > Loading Procedures > Stop the Bus, account for all students. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
The last student has boarded but is still walking down the aisle to a seat. When should the bus begin moving?
Correct answer: After checking that all passengers are seated and it is safe to depart.
The departure check includes ensuring that all passengers are seated. Clearing the doorway alone does not complete that check.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 31, physical PDF page 211; Part III > Loading Procedures > Proceed. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
You have counted the students as they stepped off the bus. What additional check is needed before moving away?
Correct answer: Recount and account for them in safe locations, including those who crossed the street.
Counting exits is only part of accounting for students. The guide calls for counting again and confirming the students are clear before the bus moves.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 32, physical PDF page 212; Part III > Unloading Procedures > Stop the Bus, steps 3–5. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
A student drops a small item beside the bus after getting off. What should the student have been taught to do?
Correct answer: Move to a safe place outside the danger zone and get the driver's attention, without going back for the item.
A dropped possession must not draw a child back into the bus's danger area. The guide tells students to move to safety and alert the driver.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 32, physical PDF page 212; Part III > Unloading Procedures > danger-zone instruction. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
You have passed a child's normal stop before realizing the mistake. Which response follows the guide's safer procedure?
Correct answer: Contact dispatch and follow the school's procedure rather than backing the bus to the stop.
An improvised reverse movement creates avoidable risk. The guide directs the driver to contact dispatch and use the established procedure for a missed stop.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 33, physical PDF page 213; Part III > Unloading Procedures > missed stop. Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
After checking traffic, you are about to give waiting students a hand signal to cross. What is an important feature of that signal?
Correct answer: It should be understood by the students without looking like permission for motorists to pass.
The guide warns against a student-crossing signal that could confuse motorists ahead of the bus. This question concerns clear communication, not a light sequence or current traffic-law exemption.
Source: Vermont School Bus Manual VN-03, reprinted June 2016, reproduced in the December 20, 2018 legislative school-safety report; printed page 32, physical PDF page 212; Part III > Unloading Procedures > crossing students, step 4(c). Older technical guidance, not verified as current Vermont DMV law, licensing or official exam content. ↗
