An air-brake system reaches its normal upper pressure and stops pumping air into the reservoirs. Which component controls this cut-out and later cut-in?
Correct answer: The air-compressor governor.
The compressor produces compressed air, while the governor controls when the compressor pumps air into the reservoirs.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.1.1 Air Compressor and 5.1.2 Air Compressor Governor; physical PDF page 75. ↗
Why is removing accumulated moisture from air reservoirs especially important before freezing weather?
Correct answer: Water can freeze and interfere with brake operation.
Compressed air can carry water and oil into reservoirs. The manual calls for daily draining of manually drained tanks because water can freeze and cause brake failure.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.1.4 Air Tank Drains; physical PDF page 75. ↗
Before moving an air-braked truck, you check its supply-pressure gauges. What do they tell you?
Correct answer: How much air pressure is stored in the reservoirs.
Supply gauges show reservoir pressure. An application-pressure gauge, when fitted, serves a different purpose by showing pressure being applied to the brakes.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.1.9 Supply Pressure Gauges; physical PDF page 76. ↗
The low-air warning activates while the truck is moving. What is the safe response?
Correct answer: Stop safely as soon as possible and correct the cause instead of waiting for automatic spring-brake application.
Low air means braking capability is in danger. The manual directs a prompt safe stop while you still have control; do not wait for further pressure loss.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.4.7 Low Air Pressure; physical PDF page 83. ↗
What keeps a typical spring parking brake released while the truck is being driven?
Correct answer: Air pressure holding back the powerful spring.
Spring brakes apply mechanically when their hold-off air is removed. Air pressure holds the spring back during normal released operation.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.1.14 Spring Brakes; physical PDF page 77. ↗
On a system without protection against brake compounding, what can happen if you press the service pedal while the spring brakes are already applied?
Correct answer: Combined spring and air forces can damage the brakes.
The manual warns that service-brake force added to applied spring-brake force can damage components. Know the controls and protective features of the vehicle you operate.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.1.15 Parking Brake Controls; physical PDF page 77. ↗
One circuit of a dual air-brake system loses pressure, while the other still has air. What does this mean for the trip?
Correct answer: Braking is reduced; stop safely and have the system repaired.
A dual system separates circuits but does not make a circuit failure harmless. The remaining brakes may not stop the vehicle normally.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.2 Dual Air Brake; physical PDF page 79. ↗
An automatic slack adjuster is repeatedly found out of adjustment. What is the appropriate approach?
Correct answer: Have qualified personnel find and repair the underlying problem.
Repeated manual adjustment can hide an underlying mechanical defect. The manual directs attention to proper repair, not recurring adjustment as a substitute.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.3.2 During Step 5 - Automatic Slack Adjusters; physical PDF page 80. ↗
In a clear, safe test area, how should you check whether the applied parking brake holds the truck?
Correct answer: Use a low gear and pull gently against the applied brake.
A gentle pull in low gear checks holding ability without an aggressive movement. This knowledge item does not replace an examiner-supervised skills inspection.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.3.3 Step 7 - Test Parking Brake; physical PDF page 81. ↗
During a slow, controlled service-brake check, the truck pulls sharply to one side. What does that suggest?
Correct answer: A possible brake problem that needs attention before normal travel.
The manual’s low-speed service-brake check looks for pulling, unusual feel, or delayed action. An abnormal result must not be dismissed.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.3.3 Step 7 - Test Service Brakes; physical PDF page 81. ↗
Your truck’s ABS is working during a hard stop. How should you use the brake pedal?
Correct answer: Apply the braking force needed to stop safely and remain in control.
ABS manages impending wheel lock automatically. It helps preserve control but does not guarantee a shorter stop or excuse unsafe speed and spacing.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.4.2 Braking with Antilock Brakes; physical PDF page 81. ↗
Why does the stopping-distance calculation for air brakes include an extra distance after the pedal is pressed?
Correct answer: Air takes time to travel through the system and operate the brakes.
Brake lag is the interval between the driver’s application and effective braking. It adds to perception, reaction, and braking distances.
Source: Oregon Commercial Driver License Manual, Form 735-36m (10-25), 5.4.4 Stopping Distance; physical PDF page 82. ↗
