Traffic in an urban test segment is exceeding the posted limit. What should you do?
Correct answer: Maintain a safe speed without exceeding the limit
Keeping with traffic does not authorize speeding; preserve following distance and lane control.
Source: Texas DL-7C March 2026, section 13.1.3, PDF page 170; modernized test ↗
Before a requested lane change, what sequence should you use?
Correct answer: Check traffic, signal, then move smoothly when safe
An examiner’s direction does not remove your responsibility to wait for safe conditions.
Source: Texas DL-7C March 2026, section 13.1.4, PDF page 170; modernized test ↗
Where does the road-test chapter direct you to decelerate when exiting an expressway?
Correct answer: Smoothly in the exit lane and then along the ramp
Check traffic, signal, maintain spacing and remain within the ramp’s lane markings.
Source: Texas DL-7C March 2026, section 13.1.5, PDF page 170; modernized test ↗
For the roadside stop/start maneuver, which stopping position is appropriate?
Correct answer: Parallel to the curb or shoulder, safely outside traffic and clear of obstructions
Do not block driveways, hydrants, intersections or signs. Secure the vehicle and use the required signals.
Source: Texas DL-7C March 2026, section 13.1.6, PDF page 170; modernized test ↗
After securing the vehicle in the roadside stop/start maneuver, which lights should be on?
Correct answer: Four-way emergency flashers, with the turn signal canceled
Apply the parking brake and select neutral or park as part of the secured stop.
Source: Texas DL-7C March 2026, section 13.1.6, PDF page 170; modernized test ↗
When instructed to resume from the roadside stop, what should you do before moving into traffic?
Correct answer: Check traffic, turn off the flashers and signal left
Wait for traffic to permit departure, release the parking brake and move smoothly into the proper lane.
Source: Texas DL-7C March 2026, section 13.1.6, PDF page 170; modernized test ↗
When preparing for a curve during the road test, when should you reduce speed?
Correct answer: Before entering the curve
Choose a safe entry speed so further braking or shifting is not normally needed within the curve.
Source: Texas DL-7C March 2026, section 13.1.7, PDF page 170; modernized test ↗
After you pass an overpass, what might the examiner ask you to recall?
Correct answer: The posted clearance or height
The route may also test recognition of bridge weight limits or other traffic signs.
Source: Texas DL-7C March 2026, section 13.1.9, PDF page 171; modernized test ↗
In a test vehicle with an unsynchronized manual transmission, what shifting method does the chapter require?
Correct answer: Double-clutching
Use the procedure for the actual transmission and avoid revving or lugging the engine.
Source: Texas DL-7C March 2026, section 13.1.11(a), PDF page 172; modernized test ↗
How often should you check traffic and mirrors around an intersection during the road test?
Correct answer: Before, while passing through and afterward
Regular observation continues throughout the maneuver, especially where pedestrians or heavy traffic may be present.
Source: Texas DL-7C March 2026, section 13.1.16, PDF page 172; modernized test ↗
