DMV Practice LabAll tests

Ohio CDL: Tank vehicles

Selected knowledge practice, not a complete licensing course or practical training.

Ohio CDL: Tank vehicles

Practice mode
Question 1 of 24
  1. 1. A CDL-required truck is designed to carry water in one permanently mounted 1,500-gallon tank. Can it be a tank vehicle even though the water is not hazardous?
  2. 2. A CDL-required truck is designed to transport liquid in two attached tanks rated 150 and 850 gallons. Do these capacities meet the federal tank-vehicle capacity thresholds?
  3. 3. A CDL-required truck carries liquid in ten attached tanks, each rated exactly 119 gallons. Do those tanks meet the individual-capacity condition in the federal tank-vehicle definition?
  4. 4. A CMV carries an empty 1,500-gallon storage-container tank that is not designed for transportation and is temporarily attached to a flatbed. How does the federal tank definition treat this specific case?
  5. 5. Why should a driver consult the operator’s manual when inspecting an unfamiliar tank vehicle?
  6. 6. You find liquid leaking from the tank shell before loading is complete. What is the proper response?
  7. 7. Before loading, unloading or moving a tanker, what must you verify about its intake, discharge and cutoff valves?
  8. 8. Where should a tanker driver pay particular attention when checking pipes, hoses and connections for leakage?
  9. 9. What should be checked about tank manhole covers?
  10. 10. Why must tank vents be kept clear and functional?
  11. 11. A tanker is equipped with an emergency shut-off system. What should be established before operating it?
  12. 12. Which fitted equipment requires checking as part of tank-vehicle inspection?
  13. 13. Which two characteristics make hauling liquid in tanks require special care?
  14. 14. A curve’s posted speed is safe for many cars. What should a liquid-tanker driver recognize?
  15. 15. A partially filled tanker stops on an icy approach to an intersection. Why can liquid movement still be dangerous?
  16. 16. What is the purpose of solid bulkheads in the tank design described by the handbook?
  17. 17. You unload some compartments of a divided tanker while leaving others full. What must you monitor?
  18. 18. How do baffles differ from solid compartment bulkheads?
  19. 19. Why can a baffled tanker still roll over during a sharp maneuver?
  20. 20. Compared with a baffled tank, what requires particular care in an unbaffled or smooth-bore liquid tank?
  21. 21. What does outage mean when loading liquid in a cargo tank?
  22. 22. Why must the driver know the required outage for the particular liquid?
  23. 23. A tank has spare volume, but loading more dense liquid would exceed an applicable weight limit. What should you do?
  24. 24. Which approach helps manage liquid surge during an ordinary planned stop?
Review all 24 questions with answers
  1. A CDL-required truck is designed to carry water in one permanently mounted 1,500-gallon tank. Can it be a tank vehicle even though the water is not hazardous?

    Correct answer: Yes; the tank definition is not limited to hazardous liquids or gases.

    The definition covers liquid or gaseous material in qualifying tanks. Tank-vehicle endorsement requirements are separate from whether a hazardous-material endorsement is also needed.

    Source: 49 CFR 383.5, definition of Tank vehicle; 383.93(b)(3); official eCFR XML as of September 11, 2026; reviewed September 14, 2026. ↗

  2. A CDL-required truck is designed to transport liquid in two attached tanks rated 150 and 850 gallons. Do these capacities meet the federal tank-vehicle capacity thresholds?

    Correct answer: Yes; each exceeds 119 gallons and together they total 1,000 gallons.

    The definition uses individual rated capacity greater than 119 gallons and aggregate rated capacity at least 1,000 gallons. Permanent and temporary attachment can both qualify.

    Source: 49 CFR 383.5, definition of Tank vehicle; official eCFR XML as of September 11, 2026; reviewed September 14, 2026. ↗

  3. A CDL-required truck carries liquid in ten attached tanks, each rated exactly 119 gallons. Do those tanks meet the individual-capacity condition in the federal tank-vehicle definition?

    Correct answer: No; the individual rated capacity must be more than 119 gallons.

    Although their total exceeds 1,000 gallons, exactly 119 gallons does not satisfy the more-than 119 individual threshold. This answer concerns the tank definition, not exemption from other CDL or cargo rules.

    Source: 49 CFR 383.5, definition of Tank vehicle; official eCFR XML as of September 11, 2026; reviewed September 14, 2026. ↗

  4. A CMV carries an empty 1,500-gallon storage-container tank that is not designed for transportation and is temporarily attached to a flatbed. How does the federal tank definition treat this specific case?

    Correct answer: It excludes that specified empty storage-container movement from tank-vehicle classification.

    The definition has a narrow exception for this empty storage-container situation. It does not apply to every empty transport tank or remove unrelated requirements.

    Source: 49 CFR 383.5, definition of Tank vehicle, final sentence; official eCFR XML as of September 11, 2026; reviewed September 14, 2026. ↗

  5. Why should a driver consult the operator’s manual when inspecting an unfamiliar tank vehicle?

    Correct answer: Tank designs and special equipment vary, so the inspection must fit that vehicle.

    The handbook requires tank-specific checks in addition to normal vehicle inspection. Know the vehicle’s equipment before loading, unloading or driving.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Tank-specific inspection instructions; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  6. You find liquid leaking from the tank shell before loading is complete. What is the proper response?

    Correct answer: Stop the unsafe operation and have the leak addressed before carrying the load.

    Do not carry liquid or gas in a leaking tank. Follow the appropriate emergency and repair procedures for the material and do not improvise a containment or repair method.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Leaking tank; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  7. Before loading, unloading or moving a tanker, what must you verify about its intake, discharge and cutoff valves?

    Correct answer: They are in the correct positions for the operation being performed.

    Different operations require the proper valve configuration. Verify the actual system’s instructions; driving with open discharge valves is not a safe shortcut.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Valve positions; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  8. Where should a tanker driver pay particular attention when checking pipes, hoses and connections for leakage?

    Correct answer: Around joints and connection points.

    Joints and connections are important potential leak points. Inspect the whole system rather than assuming an undamaged tank shell means the plumbing is sound.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Hose-joint inspection; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  9. What should be checked about tank manhole covers?

    Correct answer: Their gaskets are present and the covers close correctly.

    Correctly sealed covers help contain the cargo. Designed venting must remain functional; an open cover is not a substitute for a proper vent system.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Manhole sealing; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  10. Why must tank vents be kept clear and functional?

    Correct answer: They must perform their designed venting function.

    Inspect vents as part of the tank system and follow the equipment’s instructions. Blocking them or substituting an open cover can create an unsafe condition.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Tank vents; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  11. A tanker is equipped with an emergency shut-off system. What should be established before operating it?

    Correct answer: That the system is present, functional and understood by the driver.

    Check fitted emergency equipment and learn how it operates. The necessary equipment and procedure depend on the tank and material; this quiz does not replace operational training.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Emergency shut-off equipment; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  12. Which fitted equipment requires checking as part of tank-vehicle inspection?

    Correct answer: Grounding or bonding cables and vapor-recovery equipment, when provided.

    The handbook lists vapor recovery, grounding and bonding, emergency shut-offs and built-in fire extinguishers among equipment to check when fitted.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Special-purpose equipment; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  13. Which two characteristics make hauling liquid in tanks require special care?

    Correct answer: A high center of gravity and movement of the liquid.

    Liquid tankers can carry much of their weight high above the road, while liquid movement can affect handling. The size and construction of the actual tank still matter.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Two tanker handling hazards; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  14. A curve’s posted speed is safe for many cars. What should a liquid-tanker driver recognize?

    Correct answer: That speed may still be too fast for the tanker; slow appropriately before the curve.

    Tankers can overturn at speeds that other vehicles manage. Select a safe speed for load and conditions before entering; a posted number is not a vehicle-specific rollover guarantee.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Curve speed for tankers; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  15. A partially filled tanker stops on an icy approach to an intersection. Why can liquid movement still be dangerous?

    Correct answer: The moving liquid can push the stopped vehicle toward the intersection.

    A wave of liquid can continue moving after the vehicle stops. On low-traction surfaces that force may move the truck, so anticipate surge and stop smoothly with adequate space.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Surge after stopping; physical PDF page 95 (printed 8-1); reviewed September 14, 2026. ↗

  16. What is the purpose of solid bulkheads in the tank design described by the handbook?

    Correct answer: They divide the tank into separate smaller compartments.

    Solid partitions separate compartments. Their loading and unloading must still maintain safe weight distribution.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Bulkhead compartments; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  17. You unload some compartments of a divided tanker while leaving others full. What must you monitor?

    Correct answer: How the remaining load is distributed over the vehicle’s axles.

    Compartment loads can concentrate weight at the front or rear. Reassess distribution as loading or unloading changes the balance.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Compartment load distribution; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  18. How do baffles differ from solid compartment bulkheads?

    Correct answer: Baffles have openings that let liquid move through while reducing forward-and-back surge.

    Baffles interrupt the liquid’s forward-and-back movement while allowing flow through their openings. They do not turn the contents into a fixed solid load.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Baffle openings; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  19. Why can a baffled tanker still roll over during a sharp maneuver?

    Correct answer: Baffles do not eliminate side-to-side liquid surge.

    Forward-and-back surge control does not remove lateral movement or the tank’s high-center-of-gravity risk. Continue to steer smoothly and use a safe curve speed.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Lateral surge remains; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  20. Compared with a baffled tank, what requires particular care in an unbaffled or smooth-bore liquid tank?

    Correct answer: Stronger forward-and-back surge during starts and stops.

    Without internal structures to slow the liquid, longitudinal surge can be strong. Start and stop smoothly; do not assume all food or tank designs have identical internal construction.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Smooth-bore tank handling; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  21. What does outage mean when loading liquid in a cargo tank?

    Correct answer: Space left for the liquid to expand as it warms.

    Liquids expand with temperature, so the permitted loading amount must leave appropriate expansion space. Outage is not a single percentage that fits every product.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Outage meaning; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  22. Why must the driver know the required outage for the particular liquid?

    Correct answer: Different liquids expand by different amounts.

    Use the product and equipment requirements for expansion space. Closing the tank does not eliminate thermal expansion.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Product-specific expansion; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  23. A tank has spare volume, but loading more dense liquid would exceed an applicable weight limit. What should you do?

    Correct answer: Limit the load by weight as well as by volume and expansion space.

    A dense liquid may reach a legal weight limit before the tank is full. Loading must account for liquid weight, legal limits and expansion in transit.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Dense liquid and legal weight; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

  24. Which approach helps manage liquid surge during an ordinary planned stop?

    Correct answer: Brake early and smoothly, allowing extra following distance.

    An early, smooth stop reduces abrupt liquid movement. Maintain control through the stop; emergency technique depends on the actual braking system and conditions.

    Source: Ohio Commercial Driver License Manual, HSY 7605 7/26, Section 8 (July 2017); Planning stops with surge; physical PDF page 96 (printed 8-2); reviewed September 14, 2026. ↗

Report a problem with this question

Question reference: oh-cdl-tank-001

Opens a draft in your email app. Review and send it there; nothing is sent automatically.

Draft a correction email

Contact details & help

Study tools & test information

Study notes: tank vehicles

These classification scenarios assume a CDL-required vehicle. Individual rated capacity must exceed 119 gallons and aggregate rated capacity must reach 1,000 gallons; there is a narrow empty storage-container exception. Tank qualification does not by itself authorize hazardous-material transport. Inspection, expansion space and operating procedures depend on the actual tank and product.

Capacity, weight and movement are different checks

  • Two qualifying attached tanks rated 150 and 850 gallons meet the 1,000-gallon combined capacity condition.
  • Ten tanks rated exactly 119 gallons do not meet the individual more-than-119 condition.
  • Available tank volume does not cancel weight limits or the space needed for liquid expansion.

Bulkheads separate compartments. Baffles allow flow through openings and reduce forward-and-back surge; they do not eliminate side-to-side movement. Smooth-bore tanks need particular care during starts and stops. Use the actual equipment's braking instructions, not a blanket stab-braking rule for ABS.

These 24 independent questions reuse the same records across short tests and random draws. They do not replace the official examination, applicable ELDT or hands-on training. The Ohio manual is marked HSY 7605 7/26; these chapters retain July 2017 footers. Each answer includes an explanation.

Read the official Ohio chapter